PSO in simulink
41 次查看(过去 30 天)
显示 更早的评论
Hi. I want to run PSO algorithm in Simulink with s-functions.I will do optimization of control system with PSO. Could you help me? You can suggest anathor way for this. Thank you very much.
2 个评论
回答(11 个)
Seth Popinchalk
2011-2-10
编辑:John Kelly
2014-5-27
In general, optimization is applied to a Simulink model using MATLAB commands to adjust variables that define the parameters of the simulation. Using Particle Swarm Optimization (PSO) to optimize a system modeled in Simulink can use the same approach. Define the system you would like to optimize in Simulink and some measurement of quality of the solution based on the outputs of the simulation. Use MATLAB workspace variables to define the parameters of the system that are changing, including initial conditions or input signals to the model. The simulation can be run using the sim command to generate the outputs of the model.
Using a PSO Algorithm initialize the particles using random positions in your solution space. Run a simulation for each particle so you can calculate the quality measure. Update the particles best known position if you have improved this measure of quality.
Each particle solution can be run in parallel by running the sim command within a parfor loop.
4 个评论
Sriniwas@AT
2013-6-13
Seth Popinchalk - Is it really possible to implement Partcile Swarm Optimization algorithm for online optimization rather than offline optimization?
My idea was to perform this PSO algorithm using an Embedded Matlab Function block inside a simulink model.
Bahaa Abdulkhaliq
2018-12-3
hello, please how can i perform pso code inside an embedded function . lhave some problems
mohamed elbesealy
2016-10-8
hello
4 个评论
Quan Zhou
2017-1-31
this is an offline optimisation, the connection among m-file and Simulink is in the tracklsq.m file. hope this would help. In addition, have you find any online demo using PSO controller in the loop.
syukron jamil
2017-9-13
Kiprono
2013-2-12
Have a look at this paper. It explains pso implementation as an s-function: http://www.sciencedirect.com/science/article/pii/S0038092X12001247
0 个评论
Addie
2011-3-1
Dear Seth;
Nice sharing, I also tried the same thing as your suggested above. However it is still limited for real-time implementation such as for xPC target. Is there have any WAY that suitable for real-time implementation for PSO?
Thanks
Addie
0 个评论
Zeeshan Shareef
2011-6-12
Dear Frends, I also want to optimize the PID Controller using the PSO algorithm. Is there any code availabe or toolbox in MATLAB to optimize the PID controller or any other controller ? ? Thanks, Zeeshan Shareef
ME CONTROL SYSTEMS
2011-7-12
Dear friends.,
I want to optimize the tuning parameters of PID controller using PSO algorithm. Also I want to optimize the PID controller by minimizing ISE. Is this possible using MATLAB or Simulink. Pl help me...!!!
Regards.,
Balajee. K. A
0 个评论
ALI
2011-10-12
I want to optimize the tuning parameters of PID controller using PSO algorithm. Also I want to optimize the PID controller by minimizing ISE. Is this possible using MATLAB
0 个评论
ahmed ali
2016-8-28
hi ,, i want to know the s code of the particle swarm optimization algorithm inside ''s-function builder'' please so urgent
thanks
Tayab Azad
2017-11-16
Hi, I also don't understand that how to do online tuning of PID using PSO in simulink. can you help me to do online tuning of PID using PSO in simulink. Pls email me on ubashir1@yahoo.com
GEETHANJALI K
2018-3-16
I Want to MIMO beamforming using pso algorithm in matlab simulink diagram. can you help me?
0 个评论
Marwen FASSATOUI
2018-11-6
编辑:Marwen FASSATOUI
2018-11-6
Dear Frends, I also want to optimize the Lyapunov Function using the PSO algorithm.Is there any code availabe or toolbox in MATLAB to optimize? Can you help me?
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Particle Swarm 的更多信息
产品
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!