Problem with connection

13 次查看（过去 30 天）
Nuno
Nuno 2011-6-25
Hi... I create a model but appear the next error:
"The following two blocks cannot be connected in series because they are modeled as current sources:
Block 1: Ideal Switch1 Block 2: Subsystem/Controlled Current Source
Add a high-value resistance in parallel with one of the two block. You can also specify high-value resistive snubbers if the blocks have a snubber device."
The Ideal Switch1 and the Subsystem/Controlled Current Source was SimPowerSystems but what resistor i use to correct the error?
  1 个评论
Kaustubha Govind
Kaustubha Govind 2011-6-27
I don't have any experience with SimPowerSystems but you could possibly set a large value for the "Snubber resistance Rs" parameter in the Ideal Switch dialog, as the error message suggests.

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Nuno
Nuno 2011-6-29
I already put like the image, but appear the same error :( http://img8.imageshack.us/img8/2282/modell.png
The error is: "The following two blocks cannot be connected in series because they are modeled as current sources:
Block 1: Ideal Switch Block 2: Controlled Current Source
Add a high-value resistance in parallel with one of the two block. You can also specify high-value resistive snubbers if the blocks have a snubber device."
  4 个评论
显示 2更早的评论
Nuno
Nuno 2011-6-30
Yes, is resistor only... I put R=10 to R=80000000 but appear the same error :(
Arnaud Miege
Arnaud Miege 2011-6-30
OK, try putting a resistor in parallel with the Controlled Current Source and see if that fixes it.

请先登录，再进行评论。

更多回答（3 个）

Arnaud Miege
Arnaud Miege 2011-6-28
Just use a Series RLC Branch in parallel with your ideal switch, but keep everything on the SimPowerSystems side (i.e. the resistor should between ports 1 & 2 of the ideal switch).
HTH,
Arnaud
Nuno
Nuno 2011-6-26
Anyone?
Nuno
Nuno 2011-6-28
I was wrong to explain... I don´t how i put the resistor in parallel, because does not connect as it is: http://img696.imageshack.us/img696/7684/modeln.png

类别

在 Help Center 和 File Exchange 中查找有关 Composite Components 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by