Simulink - replace_block only works with SOME components?

4 次查看（过去 30 天）

Viren 2014-1-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/111803-simulink-replace_block-only-works-with-some-components

评论： Viren 2014-1-8

Hi all

I have a virtual subsystem with a mask. The mask allows the user to select either Enable or Disable for an option (see screenshot). Depending on the option chosen, I want the mask to replace a Constant with a Repeating Sequence or the other way around.

I have the following code:

switch get_param(gcb,'control')
    case 'Enable'
        replace_block([gcb,'/controlSequence'],'Constant','simulink/Sources/Repeating Sequence','noprompt');
    case 'Disable'
        replace_block([gcb,'/controlSequence'],'Repeating Sequence','Constant','noprompt');
end

This code works perfectly when I replace 'Repeating Sequence' with 'Inport', or 'Step' (which is in the SAME 'Sources' section!), just not with Repeating Sequence.

Any ideas why?

2 个评论
显示无隐藏无

Duke 2014-1-8

If you put the Repeating Sequence in a model, and have it selected and go to the MatLab command window and type get_param(gcb, 'BlockType') you'll see it return that it's a subsystem. That's why it's not working for you, because there is no such block as a Repeating Sequence, it's just a masked subsystem.

You should be able to replace it with a subsystem and just use get_param and set_param with add_block to excatly relacate the block you need. I've done it with compare to constant blocks before.

Viren 2014-1-8

So, you suggest that I should create the Repeating Sequence block using it's constituents, and then set their values as necessary?

I think I can do that, but wouldn't it then be easier to just delete the constant and add_block the repeating sequence, and vice versa, depending on the user's input? Or is that what you were suggesting?

请先登录，再进行评论。

请先登录，再回答此问题。