Acquire Data and Generate Signals at the Same Time for usb 6008

2 次查看（过去 30 天）

mado 2014-3-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/120714-acquire-data-and-generate-signals-at-the-same-time-for-usb-6008

评论： mado 2014-3-11

i used this code to aquire and write signals in usb 6008 simultaneously but message error appeared . how to solve that?

    % The hardware associated with this session is reserved. If you are using it in another
session use the release function to unreserve the hardware. If you are using it in an
external program exit that program. Then try this operation again.
    % % Initialization

%%get connected devices d = daq.getDevices %create session s = daq.createSession('ni')

%add analog channel  s.addAnalogInputChannel('ID',channel num, 'measurement type')
s.addAnalogInputChannel('Dev1','ai0', 'Voltage')%irradiance
s.addAnalogInputChannel('Dev1','ai1', 'Voltage')%Temperature
s.addAnalogOutputChannel('Dev1', 'ao0', 'Voltage')
% set rate of scan  1000 scans/second ,  run for 30 seconds
 s.Rate=100;
duration = s.DurationInSeconds   
v.TerminalConfig = ' Differential';
%v.TerminalConfig = ' SingleEnded';
%_____________________________
%aquire data and process
lh = s.addlistener('DataAvailable', @plotData)
%store data
h = s.addlistener('DataAvailable', @storedata);
% Analog Output 
ao_value = 3.5;
s.outputSingleScan(ao_value)