Is it possible to tune 2 PID controllers ?
显示 更早的评论
I am trying to tune 2 PID controllers but I am not able to get a good results.
Firstly I tuned the first PID then second, If I tune the first one again I got completely different results.
Could anyone give me an idea ?
采纳的回答
Arkadiy Turevskiy
2014-4-8
编辑：Arkadiy Turevskiy
2014-4-8
0 个投票
The traditional way to handle this problem is tune the inner loop first with the outer loop open, then tune the outer loop.
What that means practically is that you would delete the line from the Saturation 1 to second sum block, and tune Current Controller PID. Then connect the line back and tune Position Control PID.
The alternative method is to tune two controllers simultaneously.
更多回答（3 个）
Azzi Abdelmalek
2014-4-4
0 个投票
Since your system you want to control is not linear, the behavior of your PID is unpredictable, what you need to do is
Step1: adjust the first controller, then vary the parameters for the second controller,
step2: adjust again the first controller, and do the same for the second controller
And so on until you find acceptable performances
Can u guys advise me on the position control of the BLDC motor , i have to tune 3 pid controllers , one for position , one for speed and one for PWM which will vary the duty cycle. I am using the simpower. Can I use PID auto tunning first for inner loop, than for outer and so on.
Raju Rambha
2018-11-15
编辑：Raju Rambha
2018-11-15
0 个投票
You can get the position control example from mathworks in R2018b. where there is a compleate simulink structure for BLDC motor. If yours a latest version (R2018b) try it in command window as "pe_bldc_position_control"
类别
在 帮助中心 和 File Exchange 中查找有关 PID Controller Tuning 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
