How to mirror a function vertically?

4 次查看（过去 30 天）
Mohsen
Mohsen 2014-4-9
回答： Mohsen 2014-4-9
I have a function with non equal step size in the x axis. How can I mirror it vertically?
Here is my code:
close all; clear all; clc;
depth=[ 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.6 1.8 2 2.2 2.4 2.6 2.7 2.8 2.9 3 3.2 3.3 3.4 3.5 3.6 3.7 3.8 4 4.2 4.4 4.6 4.8 4.9 5 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.2 6.3 6.4 6.5 6.6 6.8 6.9 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 8 8.2 8.4 8.6 8.8 9 9.2 9.4 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 11.6 11.8 12 12.2 12.4 12.6 12.8 13 13.2 13.4 13.6 13.8 14 14.2 14.4 14.6 14.8 15 15.2 15.4 15.6 15.8 16 16.2 16.4 16.6 16.8 17 17.2 17.4 17.6 17.8 18 18.2 18.4 18.6 18.8 19 19.2 19.4 19.6 19.8 20 20.2 20.4 20.6 20.8 21 21.2 21.4 21.6 21.8 22 22.2 22.4 22.6 22.8 23 23.2 23.4 23.6 23.8 24 24.2 24.4 24.6 24.8 25 25.2 25.4 25.6 25.8 26 26.2 26.4 26.6 26.8 27 27.2 27.4 27.6 27.8 28 28.2 28.4 28.6 28.8 29 29.2 29.4 29.6 29.8 30]; rel_dose=[ 61.8 63.2 66 73.8 81.3 86.4 90.5 93.9 96 97.4 98.6 99.2 99.9 99.8 100.7 100 99.2 98.9 98 97.2 96.3 96.1 95.7 95.2 94.7 94.1 93.8 92.8 92.4 92.2 91.7 91.1 90.2 89.6 88.9 88.1 87.2 87.1 86 85.3 85 84.4 84 83.8 83.4 83 82.5 82.1 81.3 81.1 80.3 80.4 79.7 78.7 78.7 77.9 78 77.3 77.2 76.4 76.3 75.6 75.2 74.8 74.1 73.2 72.4 71.9 71.1 70.4 69.7 68.9 68 67.4 66.6 65.9 65.3 64.6 64 63.1 62.4 61.9 61.3 60.5 59.6 59.2 58.5 58 57.4 56.7 56.1 55.5 54.7 54.1 53.8 53 52.4 51.6 51.2 50.8 50.1 49.5 49 48.3 47.8 47.6 46.8 46.3 45.8 45.5 45.1 44.4 43.8 43.5 42.9 42.5 42 41.4 41 40.4 40.3 39.8 39.3 38.9 38.4 38 37.5 37.1 36.6 36.3 35.9 35.4 35.1 34.9 34.4 34.1 33.8 33.4 33 32.6 32.2 31.9 31.5 31.1 30.8 30.4 30.1 29.7 29.5 29.2 28.8 28.4 28.2 27.9 27.5 27.2 26.9 26.6 26.4 25.9 25.9 25.5 25.3 25.1 24.7 24.5 24.2 23.9 23.7 23.3 23.1 22.9 22.7 22.4 22.2];
Seperatio_pt = find(depth==10); depth=depth(1:Seperatio_pt);
rel_dose_1=rel_dose(1:Seperatio_pt); rel_dose_2=rel_dose_1(length(rel_dose_1):-1:1)
figure; plot(depth,rel_dose_1, 'r', 'linewidth', 3);
xlabel('Depth (cm)'); ylabel('Relative Dose (%)'); title('(Normalized Relative Dose as a Function of Depth for a 6 MV POP; FS=10x10 cm2; separation=10 cm'); hold on
plot(depth,rel_dose_2, 'b', 'linewidth', 3);
  1 个评论
Mohsen
Mohsen 2014-4-9
If you run the code, you will see the 2 curves rel_dose_1 and rel_dose_2. Basically, rel_dose_2 should be an inverted version of rel_dose_1 with respect to the midpoint of rel_dose_1. I used the following code to do this:
rel_dose_2=rel_dose_1(length(rel_dose_1):-1:1);
Then, I plotted both as a function of x (depth). This would have worked very well if the step size in the x-axis was constant. However, since that is not the case, the rel_dose_2 is not a perfect mirrored version of the rel_dose_1. I think I have to create a for loop to do this correctly...

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Mohsen
Mohsen 2014-4-9
close all; clear all; clc;
depth=[ 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.6 1.8 2 2.2 2.4 2.6 2.7 2.8 2.9 3 3.2 3.3 3.4 3.5 3.6 3.7 3.8 4 4.2 4.4 4.6 4.8 4.9 5 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.2 6.3 6.4 6.5 6.6 6.8 6.9 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 8 8.2 8.4 8.6 8.8 9 9.2 9.4 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 11.6 11.8 12 12.2 12.4 12.6 12.8 13 13.2 13.4 13.6 13.8 14 14.2 14.4 14.6 14.8 15 15.2 15.4 15.6 15.8 16 16.2 16.4 16.6 16.8 17 17.2 17.4 17.6 17.8 18 18.2 18.4 18.6 18.8 19 19.2 19.4 19.6 19.8 20 20.2 20.4 20.6 20.8 21 21.2 21.4 21.6 21.8 22 22.2 22.4 22.6 22.8 23 23.2 23.4 23.6 23.8 24 24.2 24.4 24.6 24.8 25 25.2 25.4 25.6 25.8 26 26.2 26.4 26.6 26.8 27 27.2 27.4 27.6 27.8 28 28.2 28.4 28.6 28.8 29 29.2 29.4 29.6 29.8 30]; rel_dose=[ 61.8 63.2 66 73.8 81.3 86.4 90.5 93.9 96 97.4 98.6 99.2 99.9 99.8 100.7 100 99.2 98.9 98 97.2 96.3 96.1 95.7 95.2 94.7 94.1 93.8 92.8 92.4 92.2 91.7 91.1 90.2 89.6 88.9 88.1 87.2 87.1 86 85.3 85 84.4 84 83.8 83.4 83 82.5 82.1 81.3 81.1 80.3 80.4 79.7 78.7 78.7 77.9 78 77.3 77.2 76.4 76.3 75.6 75.2 74.8 74.1 73.2 72.4 71.9 71.1 70.4 69.7 68.9 68 67.4 66.6 65.9 65.3 64.6 64 63.1 62.4 61.9 61.3 60.5 59.6 59.2 58.5 58 57.4 56.7 56.1 55.5 54.7 54.1 53.8 53 52.4 51.6 51.2 50.8 50.1 49.5 49 48.3 47.8 47.6 46.8 46.3 45.8 45.5 45.1 44.4 43.8 43.5 42.9 42.5 42 41.4 41 40.4 40.3 39.8 39.3 38.9 38.4 38 37.5 37.1 36.6 36.3 35.9 35.4 35.1 34.9 34.4 34.1 33.8 33.4 33 32.6 32.2 31.9 31.5 31.1 30.8 30.4 30.1 29.7 29.5 29.2 28.8 28.4 28.2 27.9 27.5 27.2 26.9 26.6 26.4 25.9 25.9 25.5 25.3 25.1 24.7 24.5 24.2 23.9 23.7 23.3 23.1 22.9 22.7 22.4 22.2];
Seperation_pt = find(depth==10); depth_1=depth(1:Seperation_pt); depth_2=zeros(1,length(depth_1)); depth_2(1)=depth_1(length(depth_1));
for i = 2:length(depth_1) increment=depth_1(i)-depth_1(i-1); depth_2(i)=depth_2(i-1)-increment; end
rel_dose_1=rel_dose(1:Seperation_pt);
figure; plot(depth_1,rel_dose_1, 'r', 'linewidth', 3);
xlabel('Depth (cm)'); ylabel('Relative Dose (%)'); title('(Normalized Relative Dose as a Function of Depth for a 6 MV POP; FS=10x10 cm2; separation=10 cm'); hold on
plot(depth_2,rel_dose_1, 'b', 'linewidth', 3);

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Logical 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by