Skin detection code problem?
4 次查看(过去 30 天)
显示 更早的评论
Is something wrong with my skin detection code? No matter what I try, I can't seem to get a bounding box around the hand region, it always encompasses the whole picture. I've included the code and the pictures I get.
I've used Image Analyst's ExtractNLargestBlobs() for getting the largest blob, which is the hand region. I'd really appreciate it if somebody can tell me what's wrong with the code!
Thank you!
clc;
clear all;
currentimg=imread('palm.jpg'); %capture the image of interest
%Read the image, and capture the dimensions
VidImage = currentimg;
height = size(VidImage,1);
width = size(VidImage,2);
%Initialize the output images
out = VidImage;
bin = zeros(height,width);
%Convert the image from RGB to YCbCr
img_ycbcr = rgb2ycbcr(VidImage);
Cb = img_ycbcr(:,:,2);
Cr = img_ycbcr(:,:,3);
%Detect Skin
[r,c,v] = find(Cb>=77 & Cb<=127 & Cr>=133 & Cr<=173);
numind = size(r,1);
%Mark Skin Pixels
for i=1:numind
out(r(i),c(i),:) = [0 0 255];
bin(r(i),c(i)) = 1;
end
binaryImage=im2bw(bin,graythresh(bin));
binaryImage=~binaryImage;
B = bwboundaries(binaryImage);
% imshow(binaryImage)
binaryImage = imfill(binaryImage, 'holes');
% Remove tiny regions.
binaryImage = bwareaopen(binaryImage, 5000);
%---------------------------------------------------------------------------
% Extract the largest area using ImageAnalyst's custom function ExtractNLargestBlobs().
biggestBlob = ExtractNLargestBlobs(binaryImage, 1);
% Display the image.
imshow(biggestBlob, []);
title('Final Image');
%--------------------------------------------------------------------------
[labeledImage, numberOfBlobs] = bwlabel(biggestBlob, 8);
% Get all the blob properties.
blobMeasurements = regionprops(labeledImage, 'BoundingBox','Area');
allBlobAreas = [blobMeasurements.Area];
% Display the original gray scale image.
imshow(currentimg, []);
% Loop through all blobs, putting up Bounding Box.
hold on; % Prevent boxes from blowing away the image and prior boxes.
for k = 1 : numberOfBlobs
boundingBox = blobMeasurements(k).BoundingBox; % Get box.
x1 = boundingBox(1);
y1 = boundingBox(2);
x2 = x1 + boundingBox(3) - 1;
y2 = y1 + boundingBox(4) - 1;
verticesX = [x1 x2 x2 x1 x1];
verticesY = [y1 y1 y2 y2 y1];
plot(verticesX, verticesY);
end
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/161964/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/161966/image.png)
0 个评论
采纳的回答
Image Analyst
2014-5-1
You inverted the binary image when you shouldn't have. You need to have the hand be the foreground (white). Try this fixed code, after changing the filename to what you have on your computer:
clc;
workspace
fontSize = 20;
folder = 'C:\Users\shravnathi\Documents\Temporary';
baseFileName = 'origpalm.png';
% Get the full filename, with path prepended.
fullFileName = fullfile(folder, baseFileName);
currentimg=imread(fullFileName); %capture the image of interest
subplot(2,2,1);
imshow(currentimg);
title('Original Image', 'FontSize', fontSize);
%Read the image, and capture the dimensions
VidImage = currentimg;
height = size(VidImage,1);
width = size(VidImage,2);
%Initialize the output images
out = VidImage;
bin = zeros(height,width);
%Convert the image from RGB to YCbCr
img_ycbcr = rgb2ycbcr(VidImage);
Cb = img_ycbcr(:,:,2);
Cr = img_ycbcr(:,:,3);
%Detect Skin
[r,c,v] = find(Cb>=77 & Cb<=127 & Cr>=133 & Cr<=173);
numind = size(r,1);
%Mark Skin Pixels
for i=1:numind
out(r(i),c(i),:) = [0 0 255];
bin(r(i),c(i)) = 1;
end
binaryImage=im2bw(bin,graythresh(bin));
% binaryImage=~binaryImage;
subplot(2,2,2);
imshow(binaryImage);
title('Binary Image', 'FontSize', fontSize);
B = bwboundaries(binaryImage);
% imshow(binaryImage)
binaryImage = imfill(binaryImage, 'holes');
% Remove tiny regions.
binaryImage = bwareaopen(binaryImage, 5000);
subplot(2,2,3);
imshow(binaryImage);
title('Second Binary Image', 'FontSize', fontSize);
%---------------------------------------------------------------------------
% Extract the largest area using ImageAnalyst's custom function ExtractNLargestBlobs().
biggestBlob = ExtractNLargestBlobs(binaryImage, 1);
% Display the image.
subplot(2,2, 4);
imshow(biggestBlob);
title('Final Image', 'FontSize', fontSize);
%--------------------------------------------------------------------------
[labeledImage, numberOfBlobs] = bwlabel(biggestBlob, 8);
% Get all the blob properties.
blobMeasurements = regionprops(labeledImage, 'BoundingBox','Area');
allBlobAreas = [blobMeasurements.Area];
% Display the original gray scale image.
subplot(2,2,1);
% Loop through all blobs, putting up Bounding Box.
hold on; % Prevent boxes from blowing away the image and prior boxes.
for k = 1 : numberOfBlobs
boundingBox = blobMeasurements(k).BoundingBox; % Get box.
x1 = boundingBox(1);
y1 = boundingBox(2);
x2 = x1 + boundingBox(3) - 1;
y2 = y1 + boundingBox(4) - 1;
verticesX = [x1 x2 x2 x1 x1];
verticesY = [y1 y1 y2 y2 y1];
plot(verticesX, verticesY, 'r-', 'LineWidth', 2);
end
uiwait(msgbox('Done with demo'));
6 个评论
Image Analyst
2021-9-14
@LEELA SURYA TEJA MANGAMURI, instead of extractNLargestBlobs(), you can now use the built-in bwareafilt().
@Mustapha Seidu, no need to modify anything. The code already extracts all blob measurements automatically with this line of code:
blobMeasurements = regionprops(labeledImage, 'BoundingBox','Area');
更多回答(2 个)
komal
2019-5-30
code
clc;
workspace
fontSize = 20;
folder = 'C:\Users\Dell\Documents\MATLAB';
baseFileName = 'frame129.jpg';
% Get the full filename, with path prepended.
fullFileName = fullfile(folder, baseFileName);
currentimg=imread(fullFileName); %capture the image of interest
subplot(2,2,1);
imshow(currentimg);
title('Original Image', 'FontSize', fontSize);
%Read the image, and capture the dimensions
VidImage = currentimg;
height = size(VidImage,1);
width = size(VidImage,2);
%Initialize the output images
out = VidImage;
bin = zeros(height,width);
%Convert the image from RGB to YCbCr
img_ycbcr = rgb2ycbcr(VidImage);
Cb = img_ycbcr(:,:,2);
Cr = img_ycbcr(:,:,3);
%Detect Skin
[r,c,v] = find(Cb>=77 & Cb<=127 & Cr>=133 & Cr<=173);
numind = size(r,1);
%Mark Skin Pixels
for i=1:numind
out(r(i),c(i),:) = [0 0 255];
bin(r(i),c(i)) = 1;
end
binaryImage=im2bw(bin,graythresh(bin));
% binaryImage=~binaryImage;
binaryImage = imfill(binaryImage, 'holes');
% Remove tiny regions.
binaryImage = bwareaopen(binaryImage, 5000);
subplot(2,2,3);
imshow(binaryImage);
title('Second Binary Image', 'FontSize', fontSize);
%---------------------------------------------------------------------------
% Extract the largest area using ImageAnalyst's custom function ExtractNLargestBlobs().
biggestBlob = ExtractNLargestBlobs(binaryImage, 1);
% Display the image.
subplot(2, 2, 4);
imshow(biggestBlob, []);
title('Final Image', 'FontSize', fontSize);
%--------------------------------------------------------------------------
[labeledImage, numberOfBlobs] = bwlabel(biggestBlob, 8);
% Get all the blob properties.
blobMeasurements = regionprops(labeledImage, 'BoundingBox','Area');
allBlobAreas = [blobMeasurements.Area];
% Display the original gray scale image.
subplot(2,2,1);
% Loop through all blobs, putting up Bounding Box.
hold on; % Prevent boxes from blowing away the image and prior boxes.
for k = 1 : numberOfBlobs
boundingBox = blobMeasurements(k).BoundingBox; % Get box.
x1 = boundingBox(1);
y1 = boundingBox(2);
x2 = x1 + boundingBox(3) - 1;
y2 = y1 + boundingBox(4) - 1;
verticesX = [x1 x2 x2 x1 x1];
verticesY = [y1 y1 y2 y2 y1];
plot(verticesX, verticesY, 'r-', 'LineWidth', 2);
end
uiwait(msgbox('Done with demo'));
it shows error in " biggestBlob = ExtractNLargestBlobs(binaryImage, 1);". Please help me to correct it
I have also attached the image and it is blur because I have taken image by extracting from the video.
3 个评论
komal
2019-6-11
Try this
code:
function binaryImage = ExtractNLargestBlobs(binaryImage, numberToExtract)
try
% Get all the blob properties. Can only pass in originalImage in version R2008a and later.
[labeledImage, numberOfBlobs] = bwlabel(binaryImage);
blobMeasurements = regionprops(labeledImage, 'area');
% Get all the areas
allAreas = [blobMeasurements.Area];
if numberToExtract > 0
% For positive numbers, sort in order of largest to smallest.
% Sort them.
[sortedAreas, sortIndexes] = sort(allAreas, 'descend');
elseif numberToExtract < 0
% For negative numbers, sort in order of smallest to largest.
% Sort them.
[sortedAreas, sortIndexes] = sort(allAreas, 'ascend');
% Need to negate numberToExtract so we can use it in sortIndexes later.
numberToExtract = -numberToExtract;
else
% numberToExtract = 0. Shouldn't happen. Return no blobs.
binaryImage = false(size(binaryImage));
return;
end
% Extract the "numberToExtract" largest blob(a)s using ismember().
biggestBlob = ismember(labeledImage, sortIndexes(1:numberToExtract));
% Convert from integer labeled image into binary (logical) image.
binaryImage = biggestBlob > 0;
catch ME
errorMessage = sprintf('Error in function ExtractNLargestBlobs().\n\nError Message:\n%s', ME.message);
fprintf(1, '%s\n', errorMessage);
uiwait(warndlg(errorMessage));
end
Image Analyst
2019-6-11
This is not needed anymore. There is now a function in the Image Processing Toolbox called bwareafilt() that does this:
biggestBlob = bwareafilt(binaryImage, 1); % Extract largest blob ONLY.
Ashwini Selokar
2021-2-23
skin diseases detection using mathlab coding
1 个评论
Image Analyst
2021-2-23
This is not an answer to @Shravanthi. I suggest you search this forum, the File Exchange, and VisonBibliography for some algorithms that you can code up or buy, or people who you can hire to do it for you if you don't want to write it yourself.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Feature Detection and Extraction 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!