Updating handles from within Position Changed Callback

Question

Stephen 2014-7-15

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/141961-updating-handles-from-within-position-changed-callback

编辑： Stephen 2014-7-17

I have defined an impoint roi object inside of an axis. I've set up the impoint with a callback for position changed function, and in that function I change the position of a second impoint as follows:

function positionChanged(pos)
handles = guihandles;
pointMoved = gco; %moving point is currently selected object
...
kids = get(pointMoved,'Children');
kids2 = get(correspondingPoint,'Children');
set(kids2(1),'Position',get(kids(1),'Position'));
set(kids2(1),'String',get(kids(1),'String'));
set(kids2(2),'XData',get(kids(2),'XData'));
set(kids2(2),'YData',get(kids(2),'YData'));
set(kids2(3),'XData',get(kids(3),'XData'));
set(kids2(3),'YData',get(kids(3),'YData'));

I'm just trying to get correspondingPoint to have the same values and positions as the point generating the callback, and the above works pretty well for this. The problem is that upon moving or resizing my figure window, all of those set values (minus the 'String' property, for some reason) revert, and my second impoint goes back to the position it had before the callback.

2 个评论
显示无隐藏无

Sean de Wolski 2014-7-15

My guess is that it's the gco. Can you get the handle from somewhere else?

Stephen 2014-7-16

Hrm... now that I think about it you may be right, but I am not sure how I would go about getting that another way. I have an arbitrary number of points defined at runtime, so each of them would execute the same callback. The way MATLAB handles the interrupt I have no way of controlling the input arguments to see which point is responsible for the callback. Anyone have any ideas?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Alfonso Nieto-Castanon 2014-7-15

2
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/141961-updating-handles-from-within-position-changed-callback#answer_145233

在 MATLAB Online 中打开

Your figure might have a resizefcn callback that could be reverting those values. Check:

get(gcf,'resizefcn');

7 个评论
显示 5更早的评论隐藏 5更早的评论

Stephen 2014-7-16

在 MATLAB Online 中打开

I see what you're saying. Here is the code that generates the impoints:

f = impoint(gca,handles.lastPoint{1},handles.lastPoint{2});
setColor(f,color);
pos = getPosition(f);
setString(f,[num2str(pos(1)) ', ' num2str(pos(2))]);
%ensure string gets updated if user interactively moves point
addNewPositionCallback(f,@positionChangedUnfiltered);
%duplicate on the filtered axis
f2 = impoint(handles.axFiltered,handles.lastPoint{1},handles.lastPoint{2});
setColor(f2,color);
pos2 = getPosition(f2);
setString(f2,[num2str(pos2(1)) ', ' num2str(pos(2))]);
addNewPositionCallback(f2,@positionChangedFiltered);

What I tried doing is adding these lines after every impoint definition:

impoints{1,end+1} = f;
impoints{1,end+1} = f2;
set(handles.axUnfiltered,'UserData',impoints);

And then I get impoints out inside of the callback:

impoints = get(handles.axUnfiltered,'UserData');
getPosition(impoints{1,2});

This gets me the error: reference to invalid or deleted object. For some reason, all of the objects in impoints are "deleted impoint objects".

Alfonso Nieto-Castanon 2014-7-17

编辑：Alfonso Nieto-Castanon 2014-7-17

在 MATLAB Online 中打开

I would do something like this:

 f = impoint(gca,handles.lastPoint{1},handles.lastPoint{2});
 setColor(f,color);
 pos = getPosition(f);
 setString(f,[num2str(pos(1)) ', ' num2str(pos(2))]);
 %duplicate on the filtered axis
 f2 = impoint(handles.axFiltered,handles.lastPoint{1},handles.lastPoint{2});
 setColor(f2,color);
 pos2 = getPosition(f2);
 setString(f2,[num2str(pos2(1)) ', ' num2str(pos(2))]);
 %ensure string gets updated if user interactively moves point
 addNewPositionCallback(f,@(varargin)positionChanged(f,f2));
 addNewPositionCallback(f2,@(varargin)positionChanged(f2,f));

The last two lines are the ones being modified. I am using that syntax to pass the impoint objects to the positionChanged function. Then you could have the function positionChanged something like:

 function positionChanged(f1,f2)
 pos=getPosition(f1);
 setPosition(f2,pos);
 end

And that will keep both impoint object positions "locked". Also note that if you have many impoint objects that want similarly locked (in pairs), you can just have one single positionChanged function that serves all of these, and define during the addNewPositionCallback call the appropriate parameters to pass to this function for each pair of impoint objects. Does this make sense?

Stephen 2014-7-17

编辑：Stephen 2014-7-17

Yes, that makes sense and works well! I tried it out on a copy of my code, and seems to do it. That's a neat trick to be able to cast varargin. Much appreciated! I was also able to hack my way through the problem as in the answer below, but this is much simpler.

请先登录，再进行评论。

Answer 2

Stephen 2014-7-17

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/141961-updating-handles-from-within-position-changed-callback#answer_145449

在 MATLAB Online 中打开

While I did not solve the problem, I did come up with a work-around which does what I need, in case anyone comes after me has the same issues. I've found that if you first change the position of an impoint object inside of the callback as done in the original question, and then go through and create new impoint objects in their place, the changed position is stable so long as you're careful to keep the handles.impoint array updated. Here is the code inside of the position changed callback which does that, by iterating through the handles.impoints array:

handles = guihandles;
for i = 1:length(handles.impoint)
    currentPoint = handles.impoint(i);
    kids = get(currentPoint,'children');
    %save everything to put into new point
    x = get(kids(3),'XData');
    y = get(kids(3),'YData');
    string = get(kids(1),'String');
    axis = get(currentPoint,'parent');
    userData = get(currentPoint,'UserData');
    color = get(currentPoint,'children');
    color = get(color(2),'Color');
      %don't overwrite the currently moving point
      if i == pointMovedIdx
          continue;
      end
      %otherwise, remake the point
      h = impoint(axis,x,y);
      setString(h,string);
      setColor(h,color);
      %add the correct callback based on which axis it's in
      if axis == handles.axFiltered
          %it's in axFiltered
          addNewPositionCallback(h,@positionChangedFiltered);
          %get the double handle
          han = get(handles.axFiltered,'children');
          han = han(1);
      else
          %it's in axUnfiltered
          addNewPositionCallback(h,@positionChangedUnfiltered);
          han = get(handles.axUnfiltered,'children');
          han = han(1);
      end
      set(han,'UserData',userData);
      handles.impoint(i) = han;
      delete(currentPoint);
  end

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Stephen 2014-7-17

Also, see the answer above for a much simpler solution thanks to Alfonso!

请先登录，再进行评论。

Updating handles from within Position Changed Callback

2 个评论
显示无隐藏无

采纳的回答

7 个评论
显示 5更早的评论隐藏 5更早的评论

更多回答（1 个）

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

Updating handles from within Position Changed Callback

2 个评论 显示 无隐藏 无

采纳的回答

7 个评论 显示 5更早的评论隐藏 5更早的评论

更多回答（1 个）

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

2 个评论
显示无隐藏无

7 个评论
显示 5更早的评论隐藏 5更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论