Modelling of PV array in matlab simulink

59 次查看（过去 30 天）
MEHER
MEHER 2014-7-28
评论： kunal shankar 2022-7-11
I am trying to construct a PV array in simulink. My motto is to observe characteristic for partial shading PV array with different irradiation's for each module.I have modeled individual PV modules as current sources with series and parallel combination of solar cells. According to equations a voltage feedback is required for this. To get this voltage feedback, I have connected a capacitor across current source. For an individual PV module its working fine as desired. Now when I am trying to connect two PV modules of 250W each in series and trying to observe characteristics across two modules by placing another capacitor in total. Instead of expected peak of 500W it is showing 330W.
How to connect two PV modules modeled as current source in series????
Please see the attached simulink file

请先登录，再回答此问题。

回答（5 个）

Rodney Tan
Rodney Tan 2016-10-10
In MATLAB R2015a SimPowerSystems there is a PVArray block which you can model partial shading. PV module itself is a current source, you just need to configure it to a single module by setting parallel and series string to 1 and select any 250W module from the Module list. To model partial shading you need to connect two PVArray block in series with a bypass diode for each module. Input one PVArray block with 1000 W/m^2 and the other one with 300 W/m^2 for shading effect. Use a ramp block to drive the voltage source as voltage drop load and measure its current, voltage and power using XY Scope to visualized I-V and P-V partial shading curve. I also attached the screen capture and Simulink file for your reference.
For other methods of modeling PV Module you can refer to my file exchange link below https://www.mathworks.com/matlabcentral/fileexchange/59617-pv-module-models
  5 个评论
显示 3更早的评论
loukriz abdelouadoud
loukriz abdelouadoud 2018-10-10
your simulonk file matalab make in 2016b version ,but i have MATLAB version 2014b, i would like to share us this file in previous version MATLAB 2014b .
best wish
my mail address : loukriz.abdeloudoud@gmail.com
kunal shankar
kunal shankar 2022-7-11
Is .m file available for this instead of slx?

请先登录，再进行评论。

lily mona
lily mona 2017-6-29
please i need mppt under partal shading if it's possible waiting your answer thanks
khairi elrmali
khairi elrmali 2018-6-28
PVArray block which you can model partial shading
shashank kumar
shashank kumar 2019-9-2
tHANKS
Muhammad Ahsan
Muhammad Ahsan 2021-8-5
I have 2020b version and I could not find the pv array in the simulink. Could some help me what should I do?

类别

在 Help Center 和 File Exchange 中查找有关 Simscape Electrical 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by