Plot magnitude on y-axis and time on x-axis read from an excel file

Question

KRUNAL 2014-8-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/146889-plot-magnitude-on-y-axis-and-time-on-x-axis-read-from-an-excel-file

编辑： KRUNAL 2014-8-27

I have the data as follows :

 Stage    Magnitude     Date             Time
           -1        06/10/2012       17:56:50
           -3        06/10/2012       17:59:33
           -2        06/11/2012       8:52:45
           -5        06/11/2012       8:52:46
           -3        06/12/2012       9:11:37
           -4        06/12/2012       9:55:56
           -1        06/12/2013       9:57:46
           -5        06/12/2013       10:47:49
           -2        06/12/2013       10:48:08
           -4        06/12/2013       10:50:35
           -3        06/12/2013       7:47:43
           -1        06/12/2013       8:15:30
           -2        06/12/2013       8:16:04

I want to plot the magnitude column on y-axis and date & time on x-axis. And I want to create such plots for each Stage (as per above data I should get 5 different plots)

Can I any one tell me the format of the code?

P.S : As you can see the date and time are in serial order, I mean after 11th comes 12th june(date)and after 17:59:33 after 10th june, 8:52:45 is on 11th june

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Andy L 2014-8-12

编辑：Andy L 2014-8-12

在 MATLAB Online 中打开

Have you read the data in fine? See xlsread if you are struggling!

[num, txt, raw] = xlsread('file_name');

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Ashish Gudla 2014-8-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/146889-plot-magnitude-on-y-axis-and-time-on-x-axis-read-from-an-excel-file#answer_147955

在 MATLAB Online 中打开

If you can import the excel file as column vectors, you can just loop through unique stage values and plot the respective Magnitude and Date/Time Values.

You may need to set the "XTick" and "XTickLabel" properties to make the plot look better.

Assuming you need to plot in 5 different figures (you can modify it to plot on different axes in same figure or whatever your requirement is) you could do something like this.

s = unique(Stage);
for i = s'
    XData = Time(Stage == i);
    YData = Magnitude(Stage == i);
    DData = Date(Stage == i);
    figure;
    plot(XData , YData); 
    set(gca , 'XTick', XData,'XTickLabel', [datestr(DData) datestr(XData,'HH:MM:SS')]);
end

4 个评论
显示 2更早的评论隐藏 2更早的评论

KRUNAL 2014-8-12

在 MATLAB Online 中打开

I did it by entering the statement :

 dt_time_new=cell2mat(dt_time);
  plot(dt_time_new,mag,'--rs','LineWidth',2,...
      'MarkerEdgeColor','k',...
      'MarkerFaceColor','g',...
      'MarkerSize',10)

These two lines I have added after

mag = xlsread........

line It shows me now error as : Cannot support cell arrays containing cell arrays or objects for the cell2mat line

KRUNAL 2014-8-27

编辑：KRUNAL 2014-8-27

在 MATLAB Online 中打开

@Ashish... This is what I wrote to access the column data. In my file stage is in column C, Date(in file it is called as AcquisitionDate)in column E , Time(in file it is called as AcquisitionTime)in column F and magnitude in column S

 clc;
clear all;
 orginf = '<filelocation>;
 sheet = 'Sheet1';
Stage = xlsread (orginf,sheet,'C1:S151');
 s = unique(Stage); %line 9%
for i = s'
    XData = AcquisitionDate(Stage == i); %line 11%
    YData = Magnitude(Stage == i);
    DData = AcquisitionTime(Stage == i);
    figure;
    plot(DData,YData); 
    set(gca ,'XTick', XData,'XTickLabel',[datestr(DData) datestr(XData,'HH:MM:SS')]);
end

It gives me error as

Undefined function 'AcquisitionDate' for input arguments of type 'logical'.

Error in event_plot_tr (line 11) XData = AcquisitionDate(Stage == i);

I also tried to change the line of Stage = xlsread.... to

[~, ~, Stage] = xlsread(orginf,sheet,'C1:S151');

for which I received the error as

Input A must be a cell array of strings.

Error in event_plot_tr (line 9) s = unique(Stage);

Tell me where I am wrong?

请先登录，再进行评论。

Answer 2

Nir Rattner 2014-8-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/146889-plot-magnitude-on-y-axis-and-time-on-x-axis-read-from-an-excel-file#answer_147956

在 MATLAB Online 中打开

You can use the Import Data tool in the Home tab to import your data into MATLAB. At that point you can use the "datenum" function to combine the dates and times and then use the "datetick" function to properly display the dates and times on your plots.

for i = Stage(1):Stage(end)
    figure;
    stageIndex = Stage == i;
    DateTime = datenum(Date(stageIndex)) + datenum(Time(stageIndex)) - datenum('00:00');
    plot(DateTime, Magnitude(stageIndex), '-o');
    datetick('x', 0);
end

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

KRUNAL 2014-8-12

编辑：KRUNAL 2014-8-12

I am trying to import data but it is not importing correct data. I wrote your above data and using the import function I tried importing data column wise.

The error says

Undefined function 'Stage' for input arguments of type 'double'.

Also after importing the data I am not able to see them in the workspace soon after I hit the run coomand

请先登录，再进行评论。

Answer 3

Michael Haderlein 2014-8-12

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/146889-plot-magnitude-on-y-axis-and-time-on-x-axis-read-from-an-excel-file#answer_148337

在 MATLAB Online 中打开

Please try this:

[num,txt]=xlsread('test.xlsx');
figure
dates=datestr(datenum(txt(2:end,end-1),'mm.dd.yyyy')+num(:,end),'dd.mm.yyyy HH:MM:SS');
for cnt=1:max(num(:,1))
  subplot(max(num(:,1)),1,cnt)
  plot(num(num(:,1)==cnt,2))
  set(gca,'xtick',1:sum(num(:,1)==cnt),'xticklabel',dates(num(:,1)==cnt,:))
end

On my computer, Excel changed the date format from mm/dd/yyyy automatically to mm.dd.yyyy. So maybe you need to change this in the dates line.

8 个评论
显示 6更早的评论隐藏 6更早的评论

KRUNAL 2014-8-13

在 MATLAB Online 中打开

OK.

Now this is what I have created till now and I am able to plot one figure, when stage column value is equal to 1.

 clc;
 clear all;
 orginf = '<filename>';
 sheet = 'Sheet1';
 for n =1:5
xlrange = ['C' num2str(n+1)];
a = xlsread (orginf,sheet,xlrange);
if a==1
  range = ['E' num2str(n+1)];
  range1 = ['F' num2str(n+1)];
  range2 = ['S' num2str(n+1)];
  [~,~,b] = xlsread(orginf,sheet,range);
  c = xlsread(orginf,sheet,range1);
  d = {datestr(c,'HH:MM:SS')};
  dt_time = [b,' ',d];
 [~,~,mag] = xlsread(orginf,sheet,range2);
 mag_new(n) = cell2mat(mag);
  dt_time_new(n)={cell2mat(dt_time)}
  formatIn = 'mm/dd/yyyy HH:MM:SS';
  final_time(n)=datenum(dt_time_new(n),formatIn);
end
end
  time_min = min(final_time);
  time_max = max(final_time);
  mag_min = min(mag_new)
  mag_max = max(mag_new)
  xData = linspace(time_min,time_max,5)
  yData =linspace(mag_min,mag_max,5)
  y = datestr(xData);
  plot(final_time,mag_new,'--rs','LineWidth',2,...
      'MarkerEdgeColor','k',...
      'MarkerFaceColor','g',...
      'MarkerSize',10)
  set (gca, 'Xtick',xData,'xticklabel',datestr(xData))
  set (gca, 'Ytick',yData,'Yticklabel',(yData))
  set(gca,'Ydir','reverse')

Now if I want to do the same for all the stages can anyone tell me what changes/additional script do I need to add and where..to plot one figure for each stage eg : stage 1 -figure 1,stage 2 -figure 2 and so on ?

KRUNAL 2014-8-13

I tried using your answer in my code as I mentioned above and I also told you what was the error. I would be glad if you can tell me where I am going wrong in that

Michael Haderlein 2014-8-14

I don't understand you code in every detail. If you use my code, change both "dd.mm.yyyy" to "mm/dd/yyyy", what will be the error? If you want, you can also change "subplot(max(num(:,1)),1,cnt)" to simply "figure".

请先登录，再进行评论。

Plot magnitude on y-axis and time on x-axis read from an excel file

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

回答（3 个）

4 个评论
显示 2更早的评论隐藏 2更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

8 个评论
显示 6更早的评论隐藏 6更早的评论

另请参阅

类别

标签

Community Treasure Hunt

Plot magnitude on y-axis and time on x-axis read from an excel file

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

回答（3 个）

4 个评论 显示 2更早的评论隐藏 2更早的评论

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

8 个评论 显示 6更早的评论隐藏 6更早的评论

另请参阅

类别

标签

Community Treasure Hunt

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

4 个评论
显示 2更早的评论隐藏 2更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

8 个评论
显示 6更早的评论隐藏 6更早的评论