Windows Real-Time Target - Serious Lag

1 次查看（过去 30 天）
Arne
Arne 2014-10-8
评论： Muhammad Khurram Saleem 2016-10-6
I experience serious lag-behind of a minimalistic Simulink model containing only a Real-Time Synchronization Block. As far as I can tell the problem only occurs on our Windows 7 SP1, x64 machine with i7 and 8GB of RAM. Another machine (Win 7, x64, 8GB RAM, i5) does not show this problem.
The model is configured for a 0.1sec sample time, which should be well within the capabilities of the hardware.
The Windows Real-Time Kernel reports version 4.4.0, shipped with MATLAB 2014a.

请先登录，再回答此问题。

回答（2 个）

Sandip Kumar
Sandip Kumar 2014-10-9
This is something not expected. One possible cause for the slow performance would be the 'CPU Power Management' options in BIOS, which interferes with the real-time kernel hence leading to slow performance.
Disable the power management options specific to your CPU in BIOS options and re-run the Simulink model with the block.
Thanks, Sandip, MathWorks
Suneesh
Suneesh 2014-10-10
1. Are you using the Synchronization block and running the model in Normal mode? Perhaps you could try the external mode and see if you notice the lag:
http://www.mathworks.com/help/releases/R2014a/rtwin/ug/using-real-time-applications.html
2. When you enable "Show missed ticks port" does it indicate any missed ticks?
  1 个评论
Muhammad Khurram Saleem
Muhammad Khurram Saleem 2016-10-6
Hi, Iam having the same problem. No of missed ticks stays @ zero. still simulations are running slower than real time .

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Target Computer Setup 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by