Why can't my target computer find any accessbile disk drive?
显示 更早的评论
Hi,
I have a problem to enable data logging for my Simulink Real-Time model. At startup, the target computer shows the error: no accessible disk found. It has a SATA drive with 5 partitions, of which 2 are of FAT32 format. The error message only appears once. What is the reason that the partitions are not being recognised?
I can add that I'm using an RS-232 connection and booting from a USB drive (Secondary IDE and Graphics mode enabled). Maybe it's also useful to say that the disk driver makes the hard disk appear as SCSI (under Windows).
Thanks in advance
回答（2 个）
Sandip Kumar
2014-10-29
0 个投票
This will occur if the Simulink Real-Time kernel cannot detect the partition created by a third part program. The documentation provides an example of how to format and partition a disk for use as a hard drive on the Simulink Real-Time target machine:
Thanks, Sandip
3 个评论
Marta
2014-10-30
Sandip Kumar
2014-10-30
Yes the logged data should be stored on the Target computer.
Marta
2014-10-31
Timothy
2021-9-10
0 个投票
I know that this post is very old, but just in case it helps anyone...
If the drive appears as SCSI in Windows, its likely a RAID controller and the Target OS doesn't have a diver for it. If you access the BIOS settings at boot-up look for any options mentioning RAID and try to disable them, on some motherboards this may also mean that you need to use a different SATA port for the drive so keep that in mind while troubleshooting.
类别
在 帮助中心 和 File Exchange 中查找有关 Model Statistics 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
