Roots of Polynomial in for Loop

Question

MarshallSc 2022-1-2

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1620705-roots-of-polynomial-in-for-loop

评论： Matt J 2022-1-2

I have these two vectors that are the 2nd and zero order coefficients:

R = [0.0068 0.0036 0.000299 0.0151]; 
H = [0.0086 0.00453 0.0016 0.00872];

For the equation:

func = @(x) (R - (x * x) * H);

My first question is how can I index each of the elements in the equation such that I have something like this:

func = @(x) (R(i) - (x(j) * x(k)) * H(l)) % i,j,k,l = 1:4

So for one index, the equation would be (with many roots):

f1 = @(x) 0.0068 - (x(2)*x(3) * 0.00872); % R(1) - x(2)*x(3) * H(4);
x0 = [0,0];
solve = fzero(f1,x0)

So writing all the equations, and using quadratic optimization for the simultaneous equations, the roots can be found.

But obviously this function handle would not work when indexing is needed. Is there any way to express the equation so that even the independent variable can be indexed? I know there is a way to index other components than the independent such:

for i = 1:4
   for j = 1:4
       f = sprintf('@(x) %f- (x*x)*%f;', R(i), H(i));
       r = str2func(f)
   end
end

But I'm looking to index the variables too so that I can finally get the minimum roots of this quadratic equation:

(x(j)*x(k)) * H(l) + (x(i)*x(l)) * H(k) + (x(k)*x(j)) * H(j) + (x(l)*x(i)) * H(i) = ... 
     R(i) + R(j) + R(k) + R(l)

My objective is to find the roots that minimizes the above equation, by having the coefficient of the quadratic equation that run through a loop (H(i) & R(j) are given). There is not speicifc constraint rather than interchanging the indices of the equation elements to conserve the symmetry and momentum.

I tried to use fmincon but I don't know how to assign the indexed function handle into the function and using random intial complex roots, get all the possible roots.

I posted a similar question but I think I was not very clear in my statement.

5 个评论
显示 3更早的评论隐藏 3更早的评论

MarshallSc 2022-1-2

Well, because the roots will give me information about the curvature in the system and my goal was to solve it in a way that gives me the optimum value.

Let's forget about the minimum, sorry if it made confusion, can the roots be found by having such a constraint - which is the (i;j) and (k;l) pair must be exchangeable?

Matt J 2022-1-2

编辑：Matt J 2022-1-2

Let's forget about the minimum, sorry if it made confusion, can the roots be found by having such a constraint - which is the (i;j) and (k;l) pair must be exchangeable?

If you mean that you want to solve the simultaneous equations,

then the answer is no. This is an overdetermined system of 256 equations in 4 unknowns, so it will probably not have an exact solution. You could seek a least squares solution, but that would require that you minimize something.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Matt J 2022-1-2

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1620705-roots-of-polynomial-in-for-loop#answer_866430

编辑：Matt J 2022-1-2

在 MATLAB Online 中打开

I don't understand your description of the objective function. The roots of a multivariable function are not scalars, and therefore are not something you can "minimize". However, the nonlinear constraint fucntion to fmincon would look like this:

R = [0.0068 0.0036 0.000299 0.0151]; 
H = [0.0086 0.00453 0.0016 0.00872];
objective=____;
x=fmincon(objective,A,b,Aeq,beq,lb,ub,@(x) nonlcon(x,R,H) , options)
function [c,ceq]=nonlcon(x,H,R)
  c=[];
 
  [i,j,k,l]=ndgrid(1:4);
  
   
   ceq=(x(j).*x(k)) .* H(l) + (x(i).*x(l)) .* H(k) + (x(k).*x(j)) .* H(j) +...
        (x(l).*x(i)) ,* H(i) - R(i) + R(j) + R(k) + R(l);
end

6 个评论
显示 4更早的评论隐藏 4更早的评论

Matt J 2022-1-2

编辑：Matt J 2022-1-2

在 MATLAB Online 中打开

I think that you are using abusing terminology, which is making it hard to know what you want. An "objective function" is something you are minimizing, so if you are minimzing,

f = @(x) 0.0068 - 0.00872 * x(2) * x(3)

then the solution is explicit. The explicit solution is any x with x(2)*x(3)=inf, since that will push f to -inf. Very trivial.

If instead you mean you are trying to find the root of f, that also has an explicit, trivial solution which is x(2)*x(3)=0.0068/0.00872. Since you have 2 unknowns in a single equation, the root is not defined any better than this.

Perhaps you mean that you are trying to solve the simultaneous system of equations,

(R(i) - (x(j) * x(k)) * H(l)) = 0 i,j,k,l=1...4

To convert this system of equations to a minimization problem, you would normally propose to minimize the objective function,

but note that this would not be a quadratic minimization problem, as you described it in your post. The objective function here is a degree 4 polynomial, not a quadratic.

Finally, there is this equation,

(x(j)*x(k)) * H(l) + (x(i)*x(l)) * H(k) + (x(k)*x(j)) * H(j) + (x(l)*x(i)) * H(i) = ... 
    R(i) + R(j) + R(k) + R(l)

Because you do not distinguish clearly between minimization and root-finding in your terminology, I am not sure what you are trying to do with it. Perhaps you thought that solving this equation is equivalent to solving the original simultaneous system,

(R(i) - (x(j) * x(k)) * H(l)) = 0 i,j,k,l=1...4

but that is not the case.

MarshallSc 2022-1-2

编辑：MarshallSc 2022-1-2

在 MATLAB Online 中打开

Thanks a lot Matt for your thorough feedback. Sorry if it caused confusion. Yes, the two equations are different, but I wanted to note that to say where this equation comes from (translated version of the original one) which is the one that I'm trying to solve:

(x(j)*x(k)) * H(l) + (x(i)*x(l)) * H(k) + (x(k)*x(j)) * H(j) + (x(l)*x(i)) * H(i) = ... 
    R(i) + R(j) + R(k) + R(l)

This equation comes from:

(R(i) - (x(j) * x(k)) * H(l)) = 0 i,j,k,l=1...4

By applying the symmetry requirements and basically interchanging (i;j) and (k;l) pair; the components are the same only the indices change. It essentially says that the only allowable roots are the ones that conserve the symmetry requirement that's why it gets translated into the bigger equation.

What I'm looking to do is to, as you mentioned, is to minimize the roots of this equations (translated version), that's why I was looking at optimization methods to minimze the roots of the function. Is there any method that can be used to solve this equation? This equation has 2^dimsize number of roots (2^4 = 16) in each dimension - 8 are complex and 8 are complex conjugate.

For example, if we choose an arbitrary index for each component, it will be something like this:

(x(2)*x(3)) * H(4) + (x(1)*x(4)) * H(3) + (x(3)*x(2)) * H(2) + (x(4)*x(1)) * H(1) = ... 
    R(1) + R(2) + R(3) + R(4)
Or:
(x(2)*x(3)) * H(4) + (x(1)*x(4)) * H(3) + (x(3)*x(2)) * H(2) + (x(4)*x(1)) * H(1) -  ( R(1) + R(2) + R(3) + R(4))=0 
  

Basically, i,j,k,l float from 1 to 4 in each sequence. Is there a way that I can find the roots for this equation?

MarshallSc 2022-1-2

Can we write a code that would minimizes the solutions of overdetermined system of equations with 256 equations and 4 unknowns?

Matt J 2022-1-2

The set of solutions of an overdetermined system will typically be empty. If so, there are no solutions to minimize over.

请先登录，再进行评论。

Roots of Polynomial in for Loop

5 个评论
显示 3更早的评论隐藏 3更早的评论

采纳的回答

6 个评论
显示 4更早的评论隐藏 4更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

Roots of Polynomial in for Loop

5 个评论 显示 3更早的评论隐藏 3更早的评论

采纳的回答

6 个评论 显示 4更早的评论隐藏 4更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

5 个评论
显示 3更早的评论隐藏 3更早的评论

6 个评论
显示 4更早的评论隐藏 4更早的评论