MATLAB 2014b missing GUIDE elements

Question

Greig 2014-11-21

5
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/163680-matlab-2014b-missing-guide-elements

评论： Greig 2015-5-13

I started creating a GUIDE GUI in 2014a and have just upgraded to 2014b. I was aware that some GUI elements may be hidden due to the new graphics system. And, lo and behold, parts were "missing" when I ran it. I fixed these minor points and carried on.

However, larger parts of the GUI, which initially worked in 2014b, disappeared (as well as having the positions of some elements reset to [0,0,1,1]). So, with a big pot of coffee, away I went fixing it, moving things back and front and in and out of their parent panels. Then I re-ran my and GUI everything looks as it should.

The catch, however, is when I close and re-run GUIDE (after saving), big chunks of the GUI are not visible in GUIDE. When I run the GUI, however, everything is as it should be. I have re-tweak the GUI in GUIDE to make elements visible, and it all works fine. But again, saving and restarting GUIDE leaves elements hidden. The GUI, however, still looks as it should.

In short, my GUI works as it should, but it is a pain to edit with GUIDE because of the elements being hidden. This is my first GUI, so missing something really obvious is a possibility. I'm running 2014b, on OS X Mavericks.

8 个评论
显示 6更早的评论隐藏 6更早的评论

Adam 2015-1-8

编辑：Adam 2015-1-8

I am also having similar problem, but in my case R2014a was not involved at all. This is a UI started in R2014b, but seemingly suffering the same problem.

I have nested panels and some UI components inside the nested panel. I think it is the use of normalized units that is causing this problem because it worked fine before I changed the components and the panels to use normalized units.

Now my components keep disappearing from the panel.

My code changes the visibility of the panel, on and off according to a radio button and the components show initially if the UI is in the state where they should be visible, but after pressing the radio button to a state where they should be hidden they never reappear on returning to the state where they should be visible.

Also they keep disappearing in GUIDE despite me clearly positioning them on the panel (they are children of the panel - I have checked this both in GUIDE and the code in debug). The problem clearly seems to be something odd happening with the normalized units causing the components to be rendered somewhere off the panel because the position contains silly values > 1 in GUIDE for these hidden components after I carefully positioned them and made sure they had values < 1 for all elements of the 'Position' vector.

Luca Amerio 2015-3-19

编辑：Luca Amerio 2015-3-19

Same problem here. Components inside panels works fine when I run the GUI, but inside GUIDE they are invisible. They are there, I can click them or select them from the object browser. I can change their properties etc etc.

BUT I CAN'T SEE THEM IN GUIDE

The units of these objects weren't normalized, but they were all hidden by default(they were meant to appear after a certain action).

I tried to upgrade to 2015a, but nothing changed.

I already ran both the updater tools. Nothing changed. I also told the panels to "Send to back". Again nothing changed.

I noticed however that even brand new components added to those panels are hidden.

UPDATE: I found that a simple cut & paste of the flawed object restore their appearance. However this screws up all the tags and the callbacks. This means a quite long work to fix everything again.

UPDATE2: If you undo (instead of paste) the Tags will be correct and the workaround still works. I wrote this below as proposed "solution" (more a workaround than a solution though).

Vincent 2015-5-13

I'm having the same problem. I also used nested panels in my GUI. Some panels disappear in both GUIDE and when I run the GUI.

Luca Amerio's fix works most of the time, but is there a "proper" solution yet?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Luca Amerio 2015-3-19

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/163680-matlab-2014b-missing-guide-elements#answer_171952

I found a work-around: if you cut (or delete) the panel and then UNDO, the panel's elements appears at their place. Pay attention not to PASTE because this screws up all the tags and the callbacks.

Once you save and re-open the gui, the elements are again invisible and the procedure has to be repeated.

A fast way is to open the gui and then "select all" (CTRL-A), delete (DEL) and undo (CTRL-Z). Everything will be then fine.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Greig 2015-5-13

A useful work around, but hopefully something that will be fixed in a near future release.

请先登录，再进行评论。

Answer 2

Matt J 2014-11-23

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/163680-matlab-2014b-missing-guide-elements#answer_159914

编辑：Matt J 2014-11-23

Did you try running the updater tools

http://www.mathworks.com/products/matlab/matlab-graphics/tools-for-transitioning-to-R2014b-graphics.html

on the original GUI code?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Greig 2014-11-23

Hi Matt,

I have run both updater tools, but they don't pick up any problems for the code or the figure (before suffering the problem I am about to describe).

I'm working on a trimmed down version of the code to illustrate this problem. In the original GUI resize behaviour was set to "Proportional", so I tried turning it off and running it again, this is what I got (GUIDE still shows the same)...

But the graphics app gives this...

On closer inspection, the object browser shows that all the "missing" elements are there, but that there positions are now [0,0,0,0]. Resetting the resizing does nothing. Resizing and moving of some of the elements was a problem I had before, but not having all reset like this.

I'll work on getting a trimmed version that has the elements in their place, but are not displayed in GUIDE.

Cheers Greig

请先登录，再进行评论。

MATLAB 2014b missing GUIDE elements

8 个评论
显示 6更早的评论隐藏 6更早的评论

采纳的回答

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

更多回答（1 个）

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

产品

Community Treasure Hunt

MATLAB 2014b missing GUIDE elements

8 个评论 显示 6更早的评论隐藏 6更早的评论

采纳的回答

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

更多回答（1 个）

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

产品

Community Treasure Hunt

8 个评论
显示 6更早的评论隐藏 6更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论