Same colour scale for scatter and line plots on same graph - different groups of data

Question

Em 2022-3-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1666659-same-colour-scale-for-scatter-and-line-plots-on-same-graph-different-groups-of-data

评论： Star Strider 2022-3-9

采纳的回答： Star Strider

I have 2 sets of data (denoted by 250 and nothing at the end of the string)

My 2 problems:

I'm trying to make line plots through the datapoints which are the same colour as the scatter markers, how can I do this?
I want to make the colour scale for '250' and nothing data to be along different colour scales - like red and green colours of different darkness level if that is possible! Does anyone know how to do this? I've attached the code I have so far with this goal in mind

Cheers!!

powerpc=[70 58 42 28];

figure

%subplot(4,2,8);

scatter(powerpc,abs(table2array(inner70mw03))',20)

hold on

scatter(powerpc,abs(table2array(inner70mw05))',20)

hold on

scatter(powerpc,abs(table2array(inner70mw07))',20)

hold on

scatter(powerpc,abs(table2array(inner70mw09))',20)

hold on

scatter(powerpc,abs(table2array(inner70mw03_250Hz))',20)

hold on

scatter(powerpc,abs(table2array(inner70mw05_250Hz))',20)

hold on

scatter(powerpc,abs(table2array(inner70mw07_250Hz))',20)

hold on

scatter(powerpc,abs(table2array(inner70mw09_250Hz))',20)

ylabel('Carbonised region diameter/ \mum');

xlabel({'Laser Power/mW'})

M=8;

% pick some colormap and apply it to the colororder property

mycolortable = parula(M);

%set(powerpc,'ylim',[0 5])

ylim([0 25])

xlim([20 70])

set(gca,'colororder',mycolortable)

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Star Strider 2022-3-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1666659-same-colour-scale-for-scatter-and-line-plots-on-same-graph-different-groups-of-data#answer_913019

For 1. this is easy enough

Use plot instead of scatter —

powerpc=[70 58 42 28];

figure

%subplot(4,2,8);

plot(powerpc,abs(table2array(inner70mw03))', '-o')%, 'MarkerSize',20)

hold on

plot(powerpc,abs(table2array(inner70mw05))', '-o')

hold on

plot(powerpc,abs(table2array(inner70mw07))', '-o')

hold on

plot(powerpc,abs(table2array(inner70mw09))', '-o')

hold on

plot(powerpc,abs(table2array(inner70mw03_250Hz))', '-o')

hold on

plot(powerpc,abs(table2array(inner70mw05_250Hz))', '-o')

hold on

plot(powerpc,abs(table2array(inner70mw07_250Hz))', '-o')

hold on

scatter(powerpc,abs(table2array(inner70mw09_250Hz))', '-o')

ylabel('Carbonised region diameter/ \mum');

xlabel({'Laser Power/mW'})

M=8;

% pick some colormap and apply it to the colororder property

mycolortable = parula(M);

%set(powerpc,'ylim',[0 5])

ylim([0 25])

xlim([20 70])

set(gca,'colororder',mycolortable)

I do not understand what you want for 2.

.

4 个评论
显示 2更早的评论隐藏 2更早的评论

Star Strider 2022-3-8

As always, my pleasure!

This is the best I can do for the colours —

load('frequencywidth.mat');

cmr = colormap(hot(12));

cmg = colormap(summer(12));

powerpc=[70 58 42 28];

figure

%subplot(4,2,8);

plot(powerpc,abs(table2array(inner70mw03))', '-o', 'Color',cmr(1,:))

hold on

plot(powerpc,abs(table2array(inner70mw05))', '-o', 'Color',cmr(2,:))

hold on

plot(powerpc,abs(table2array(inner70mw07))', '-o', 'Color',cmr(3,:))

hold on

plot(powerpc,abs(table2array(inner70mw09))', '-o', 'Color',cmr(4,:))

hold on

plot(powerpc,abs(table2array(inner70mw03_250Hz))', '-o', 'Color',cmg(1,:))

hold on

plot(powerpc,abs(table2array(inner70mw05_250Hz))', '-o', 'Color',cmg(2,:))

hold on

plot(powerpc,abs(table2array(inner70mw07_250Hz))', '-o', 'Color',cmg(3,:))

hold on

plot(powerpc,abs(table2array(inner70mw09_250Hz))', '-o', 'Color',cmg(4,:))

ylabel('Carbonised region diameter/ \mum');

xlabel({'Laser Power/mW'})

% M=8;

% pick some colormap and apply it to the colororder property

% mycolortable = parula(M);

%set(powerpc,'ylim',[0 5])

ylim([0 25])

xlim([20 70])

% set(gca,'colororder',mycolortable)

Experiment with that to get the result you want, since it may be necessary to subscript into different rows of the red (‘cmr’) and green (‘cmg’) arrays to do that. Using colororder is a bit difficult here.

.

Em 2022-3-9

Thanks so much! That's exactly what I was looking for.

Star Strider 2022-3-9

As always, my pleasure!

请先登录，再进行评论。

Same colour scale for scatter and line plots on same graph - different groups of data

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

4 个评论
显示 2更早的评论隐藏 2更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Same colour scale for scatter and line plots on same graph - different groups of data

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

4 个评论 显示 2更早的评论隐藏 2更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

4 个评论
显示 2更早的评论隐藏 2更早的评论