Speedgoat to Speedgoat TCP Communication

Question

Rhett Green 2022-3-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1666999-speedgoat-to-speedgoat-tcp-communication

评论： Rhett Green 2022-3-21

2022-03-08 16_23_41-Ask a Question - and 10 more pages - Work - Microsoft Edge.png

I have been sending a command matrix from a MATLAB GUI to a simulink model running in standalone mode on a Speedgoat. I did this using the simulink blocks attatched. Then in my GUI I create a TCP client with tcp = tcpclient('192.168.7.5',5027);. I can then write my data with write(tcp,data);. For the next project however I need to communicate Speedgoat to Speedgoat via TCP. I used the simulink blocks TCP Server in one model and TCP Client in the other. This built fine but when I went to the MATLAB command window to create the TCP Server object with, t = tcpserver(IP address, port), so I can write and read data from them it says I need "Instrument Control Toolbox". It seems odd that I can create a client object fine but not a server. The blocks compiled so I'm assumming my Server and Client exist I just need to enable them. Is there a way I can do this without buying the "Instrument Control Toolbox" or must I buy it for Simulink to Simulink communication via TCP.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Diego Kuratli 2022-3-10

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1666999-speedgoat-to-speedgoat-tcp-communication#answer_914624

The tcpserver function is only available in Instrument Control Toolbox. However, you could use the tcpclient function which is included in MATLAB:

https://www.mathworks.com/help/matlab/ref/tcpclient.html

Here is an example showing TCP host-target communication:

Target to Development Computer Communication by Using TCP - MATLAB & Simulink (mathworks.com)

7 个评论
显示 5更早的评论隐藏 5更早的评论

Rhett Green 2022-3-10

The host computer will eventually run a Labview GUI which is why TCP communication was selected, so I don't think the MATLAB API is an option (unless that assumption is incorrect?). That TCP host-target communication example is how I set up the MATLAB GUI-Speedgoat communication for a proof of concept. It was limited though, all it did was write data to the speedgoat. The final product will need to write data (Command Matrix, Parameter Tuning) to the Control Speedgoat and also read data and connection status back from the Control Speedgoat. The Control Speedgoat will then have ethernet connections to other hardware with similar needs. They will all need to recieve data and parameter tuning from the Control Speedgoat, and then respond back with Data and Connection Status. I have attatched a diagram "TCP Network Diagram1" to visually show what I'm trying to accomplish. The other images are the simulink TCP Server and Client blocks I have on the speedgoats. The "TCPServerSS" is running on the Control Speedgoat and the "TCPClientSS" is running on the Client Speedgoat and they are both connected by ethernet. These models compile but like I said I can't run the code t = tcpserver(IP address, port) because I dont have Instrument Control Toolbox. It just seems odd that I have access to the TCPServer simulink block but no way to utilize it, to implement the network in "TCP Network Diagram1" must I have Instrument Control Toolbox? Why? I would also like a way to display communication updates in the GUI like "Data recieved", is there a way to programtically monitor the sockets to see if and when the data has been recieved?

Diego Kuratli 2022-3-15

On the Speedgoat side, we don't have a mechanism to detect new data, but you can add some logic to the data and length port.

On the host side (MATLAB), there are some callbacks that may help:

Set callback function and trigger condition for communication with remote host over TCP/IP - MATLAB configureCallback (mathworks.com)

If in the host you have MATLAB+SLRT installed, I would look into the instrument object:

Create real-time instrument object - MATLAB (mathworks.com)

Rhett Green 2022-3-21

Ok. Thank you for your help.

请先登录，再进行评论。

Speedgoat to Speedgoat TCP Communication

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

7 个评论
显示 5更早的评论隐藏 5更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Speedgoat to Speedgoat TCP Communication

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

7 个评论 显示 5更早的评论隐藏 5更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

7 个评论
显示 5更早的评论隐藏 5更早的评论