Input Code for programmable voltage supply simulink

Question

Saurabh Sakpal 2014-12-17

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/166948-input-code-for-programmable-voltage-supply-simulink

评论： Orion 2014-12-17

Hey everyone, I am working on a project on simulink where i have to build a RC circuit. Anyway the voltage source for this has to be 'sin wave for first 0.6 seconds and 0 for the rest of 0.4 seconds. Obviously this requires matlab coding with a script, like an if statement etc.. So how do i go about doing this for a voltage source of an RC circuit in simulink.

Thanks

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Orion 2014-12-17

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/166948-input-code-for-programmable-voltage-supply-simulink#answer_162614

Hi,

you could also just do it in Simulink:

2 个评论
显示无隐藏无

Saurabh Sakpal 2014-12-17

Like how do i integrate this signal into the circuit, as i tried connecting the 'switch' (scope is not needed as i know how the graph looks) to DC voltage source, but it won't connect, just that dashed red arrow there but no connection. Sorry i am new to simulink.

Orion 2014-12-17

I'm guessing you're using a simscape block ?

I don't have this toolbox anymore, but if I recall fine, you need to use the PS-Simulink Converter block to pass the data into first branch of the switch and then get the output and use the Simulink-PS COnverter to reconvert the signal in order to use tit in your circuit.

请先登录，再进行评论。