Matlab crashed on start on Fedora 36

69 次查看（过去 30 天）
Hyma Harish Vallabhapurapu
回答： Joshua Rhodes 2023-8-25
As title suggests, matlab crashes when launched form the terminal on Fedora 36. There are lots of Java errors. the version of Matlab I am using is 2021b. See attached image for error. Running ./bin/glnxa64/MATLABWindow gives the error symbol lookup error: /lib64/libcairo.so.2: undefined symbol: FT_Get_Color_Glyph_Layer
For reference, matlab worked fine on Fedora 35. I had upgraded just two days earlier.
  1 个评论
Riccardo Scorretti
Riccardo Scorretti 2022-4-21
Up to my (limited) experience, this could be due to an incompatibility between the libraries shipped with MATLAB and the ones installed in the system. Usually this kind of very nasty problem can be solved either by removing the version of the library shipped with MATLAB, or by downgrading the cluprit library.
Assuming that the library which is at the origin of the problem is libcairo.so.2, which is not shipped with MATLAB, you can try the following procedure:
  1. download the previous version of the library from https://download-ib01.fedoraproject.org/pub/fedora/linux/releases/35/Everything/aarch64/os/Packages/c/cairo-1.17.4-4.fc35.aarch64.rpm. It should be a file named cairo-1.17.4-4.fc35.aarch64
  2. Extract the file (don't install, just extract it) and copy the file libcairo.so.2.11704.0 somewhere (personally I would copy it into /usr/lib64)
Now, I would like to run MATLAB by using: LD_PRELOAD=/usr/lib64/libcairo.so.2.11704.0 matlab. Unfortunately I get the error:
ERROR: ld.so: object 'libcairo.so.2.11704.0_copy' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
I think that if you manage to solve this problem and preload the version of the library shipped with F35, your problem could be solved. I hope it helps.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（6 个）

Trevor Vannoy
Trevor Vannoy 2022-6-28
There's no need to downgrade libcairo to the Fedora 35 version. According to the Arch Wiki The issue stems from the version of libfreetype that ships with MATLAB.
I fixed the issue by setting aside MATLAB's libfreetype.so.6.16.0 library, then symlinking to my system's libfreetype.s0.6:
cd /usr/local/MATLAB/R2022a/bin/glnxa64
sudo mv libfreetype.so.6.16.0{,.bak}
sudo ln -sf /lib64/libfreetype.so.6 libfreetype.so.6
  1 个评论
Mikael
Mikael 2023-2-19
This seemed to solve my problems for R2023b but I later found that I could not start
simulink, got error
Caught std::exception Exception /usr/local/MATLAB/R2022b/bin/glnxa64/libmwdastudio.so
when starting simulink.
So finally I had to downgrade cairo to F35 status as described below.

请先登录，再进行评论。

Anil GURSES
Anil GURSES 2022-5-1
I solved the problem by downgrading libcairo and dependent packages. You can use the command below,
sudo dnf install cairo-1.17.4 --releasever=35
If you still encounter an error, try to link /lib64/libcairo.so to /lib64/libcairo.so.2.
sudo ln -s /lib64/libcairo.so /lib64/libcairo.so.2
I hope this helps.
  3 个评论
显示 1更早的评论
Anil GURSES
Anil GURSES 2022-5-7
Hi Mark,
You can install R2022a by just removing libfreetype.so.6 from the installer setup files. Go to your matlab installer directory and run the command below,
rm ./bin/glnxa64/libfreetype.so.6*
Ref. wiki
Julio Larco
Julio Larco 2022-5-14
编辑：Julio Larco 2022-5-14
Only remove files " rm libfreetype.so.6*" of the installer. I don't remember where I saw that, but this works for me.

请先登录，再进行评论。

Viktor Erdelyi
Viktor Erdelyi 2022-5-16
I'm using 2022a, but I managed to fix the issues by moving/removing the following files
  • mv sys/opengl sys/opengl_BAK
  • rm sys/os/glnxa64/libstdc++*
  • rm bin/glnxa64/libfreetype*
Clemens
Clemens 2022-9-26
编辑：Clemens 2022-9-26
On an up to date debian sid system, this works for me (thanks to Trevor and Victor, see above their posts):
  • copy iso image to a directory A
  • cd A
  • rm bin/glnxa64/libfreetype*
  • rm sys/os/glnxa64/libstdc++.so.6*
  • cd bin/glnxa64/
  • ln -sf /usr/lib/x86_64-linux-gnu/libfreetype.so.6 libfreetype.so.6
  • cd ../.. # change again to directory A
  • ./install
After that the installer window opens and I can install and run matlab r2022b.
Cristian Le
Cristian Le 2022-6-21
Is this issue still prevelant in R2022b? Pinning cairo to an old releasever is not an ideal solution for the users.
  2 个评论
Trevor Vannoy
Trevor Vannoy 2022-6-28
You don't need to downgrade cairo. See my answser: https://www.mathworks.com/matlabcentral/answers/1699735-matlab-crashed-on-start-on-fedora-36#answer_995890
Mikael
Mikael 2023-2-19
It seems you need to downgrade to libcairo, Fedora 35-status, if you are also intending to use simulink, unfortunately,
as of my testing and web search. See my above comment.

请先登录，再进行评论。

Joshua Rhodes
Joshua Rhodes 2023-8-25
You could also try using distrobox and podman to create an ubuntu container and running Matlab in that. (Ubuntu is one of the guaranteed supported distros.)

类别

在 Help Center 和 File Exchange 中查找有关 Startup and Shutdown 的更多信息

标签

产品


版本

R2021b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by