Only part of my plotted line will dash and how to add text to a line in the plot?

3 次查看（过去 30 天）
Tomaszzz
Tomaszzz 2022-4-26
评论： Voss 2022-4-29
Hi all,
This code:
load('z_means'); load ('z_diffs'); load ('z_CR_ofmean')
figure ('color','w');
plot(z_means,z_diffs,'sr', 'MarkerSize', 9)
hold on
%Plot lines
plot(z_means,zeros(1,length(z_means)),'r', 'LineWidth', 0.7); %%%plot zero
plot(z_means, ones(1,length(z_means)).*z_CR_ofmean(1),'r--', 'LineWidth', 0.6); %%%plot the upper CR
plot(z_means, ones(1,length(z_means)).*z_CR_ofmean(2),'r--', 'LineWidth', 0.6); %%%plot the lower CR
% Add text
text(z_CR_ofmean, [mynum2str(z_CR_ofmean(1)) ''],'HorizontalAlignment','left','VerticalAlignment','middle','fontsize',6);
text(z_means, [mynum2str(z_means,2) ''],'HorizontalAlignment','left','VerticalAlignment','middle','fontsize',6);
text(z_CR_ofmean, [mynum2str(z_CR_ofmean(2))''],'HorizontalAlignment','left','VerticalAlignment','middle','fontsize',6);
Produces this:
and the error:
Error using text
First two or three arguments must be numeric doubles.
Wheareas I want:
  1. Dashed lines to be dashed throughout the whole lenght of the lines
  2. Add text to each line correctly (can be any text as an example)
Data attached. Can you help please?

请先登录，再回答此问题。

采纳的回答

Johannes Hougaard
Johannes Hougaard 2022-4-26
Hi Tomaszzz
The reason some of the line is full and not dotted is that is it not the line as such but more a connection between two points - this often occurs when the data are not ordered.
You can fix the issue simply by sorting your x data
load('z_means'); load ('z_diffs'); load ('z_CR_ofmean')
figure ('color','w');
plot(z_means,z_diffs,'sr', 'MarkerSize', 9)
hold on
%Plot lines
plot(sort(z_means),zeros(1,length(z_means)),'r--', 'LineWidth', 0.7); %%%plot zero
plot(sort(z_means), ones(1,length(z_means)).*z_CR_ofmean(1),'r--', 'LineWidth', 0.6); %%%plot the upper CR
plot(sort(z_means), ones(1,length(z_means)).*z_CR_ofmean(2),'r--', 'LineWidth', 0.6); %%%plot the lower CR

更多回答（1 个）

Voss
Voss 2022-4-26
Ran in:
text requires 2 coordinates (x,y) or 3 coordinates (x,y,z) to specify the text location. You were supplying only one coordinate.
load('z_means'); load ('z_diffs'); load ('z_CR_ofmean');
figure ('color','w');
plot(z_means,z_diffs,'sr', 'MarkerSize', 9)
hold on
%Plot lines
z_means_sorted = sort(z_means);
plot(z_means_sorted([1 end]),[0 0],'r', 'LineWidth', 0.7); %%%plot zero
plot(z_means_sorted([1 end]),z_CR_ofmean([1 1]),'r--', 'LineWidth', 0.6); %%%plot the upper CR
plot(z_means_sorted([1 end]),z_CR_ofmean([2 2]),'r--', 'LineWidth', 0.6); %%%plot the lower CR
% Add text
text(z_means_sorted(1),z_CR_ofmean(1), [num2str(z_CR_ofmean(1)) ''],'HorizontalAlignment','left','VerticalAlignment','bottom','fontsize',10);
% text(z_means, [num2str(z_means,2) ''],'HorizontalAlignment','left','VerticalAlignment','middle','fontsize',6);
text(z_means_sorted(1),z_CR_ofmean(2), [num2str(z_CR_ofmean(2))''],'HorizontalAlignment','left','VerticalAlignment','top','fontsize',10);

类别

在 Help Center 和 File Exchange 中查找有关 Annotations 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by