How can I add uncertainty to a data matrix?

Question

Wiqas Ahmad 2022-5-18

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1722145-how-can-i-add-uncertainty-to-a-data-matrix

评论： Star Strider 2022-5-21

I obtained a signal data by running a simulation with input parameters. Some of these inputs are h,a,r,fov as shown in the following program. The output signals are beta_para and beta_per. The output signals are highly influenced by these four input parameters. What I want now is to add uncertainty to the inputs like fov±0.005 and obtained the signals with the input error. One way to do this is to repeat the simulation and input the parameters with uncertainties and obtained the output signals with error, however the process is very lengthy because my data is too big. I had come to know that we can deal it using repmat function in matlab as well without repeating the simulation. I don't know how can I use the repmat function to add uncertainties of the input parameters h,a,r,and fov to the signals beta_para and beta_per. Please if anybody can help me in this regard. My program is::

clear all,clc,close all
cloud = 'Homo';
T_para = zeros(5, 17, 20);
T_per = zeros(5, 17, 20);
h = 1000:1000:4000;
a = 0.01:0.01:0.05;
r = 4:1:20;
fov = [0.2, 0.5, 1, 2, 5, 10];
for i=1:length(h)
    for j=1:length(fov)
        dir_arhf = ['Tabledata_', cloud, '\', num2str(h(i)), 'm-', num2str(fov(j)), 'mrad'];
        mkdir(dir_arhf);
        for k=1:length(a)
            for m=1:length(r)
                load (['MCdatabase_', cloud, '/', num2str(a(k)), '-', num2str(r(m)), 'um/', num2str(h(i)), 'm-', num2str(fov(j)), 'mrad/I0.mat']);
                load (['MCdatabase_', cloud, '/', num2str(a(k)), '-', num2str(r(m)), 'um/', num2str(h(i)), 'm-', num2str(fov(j)), 'mrad/Q0.mat']);
                I_para = 1/2 * (I0 + Q0);
                I_per = 1/2 * (I0 - Q0);
                hh = genHeight(h(i)).^2;
                beta_para = sum(I_para, 2) .* hh';
                beta_per = sum(I_per, 2) .* hh';
                T_para(a(k) * 100, r(m)-3, :) =beta_para';
                T_per(a(k) * 100, r(m)-3, :) =beta_per';
                save([dir_arhf, '\TABLE.mat'], 'T_per', 'T_para');
            end
        end
    end
end
 

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Star Strider 2022-5-18

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1722145-how-can-i-add-uncertainty-to-a-data-matrix#answer_966405

The repmat funciton is likely not needed. Just do something like this:

h = h + randn(size(h));

and so for the rest.

See the randn documentation for details.

.

12 个评论
显示 10更早的评论隐藏 10更早的评论

Wiqas Ahmad 2022-5-18

在 MATLAB Online 中打开

The function works. But actually the values of these inputs are also assigned to the title of the data in the address. Using randn changes the values of these inputs and then the program is unable to locate and load the data. It shows the following error:

I used it as:

clear,clc,close all
cloud = 'Homo';
T_para = zeros(5, 17, 20);
T_per = zeros(5, 17, 20);
h = 1000:1000:4000;
h=h+randn(size(h))
a = 0.01:0.01:0.05;
a=a+randn(size(a));
r = 4:1:20;
r=r+rand(size(r))
fov = [0.2, 0.5, 1, 2, 5, 10];
fov=fov+randn(size(fov))
for i=1:length(h)
    for j=1:length(fov)
        dir_arhf = ['Tabledata_', cloud, '\', num2str(h(i)), 'm-', num2str(fov(j)), 'mrad'];
        mkdir(dir_arhf);
        for k=1:length(a)
            for m=1:length(r)
                load (['MCdatabase_', cloud, '/', num2str(a(k)), '-', num2str(r(m)), 'um/', num2str(h(i)), 'm-', num2str(fov(j)), 'mrad/I0.mat']);
                load (['MCdatabase_', cloud, '/', num2str(a(k)), '-', num2str(r(m)), 'um/', num2str(h(i)), 'm-', num2str(fov(j)), 'mrad/Q0.mat']);
                I_para = 1/2 * (I0 + Q0);
                I_per = 1/2 * (I0 - Q0);
                hh = genHeight(h(i)).^2;
                beta_para = sum(I_para, 2) .* hh';
                beta_per = sum(I_per, 2) .* hh';
                T_para(a(k) * 100, r(m)-3, :) =beta_para';
                T_per(a(k) * 100, r(m)-3, :) =beta_per';
                save([dir_arhf, '\TABLE.mat'], 'T_per', 'T_para');
            end
        end
    end
end
 

Wiqas Ahmad 2022-5-21

I got it. Thank you

Star Strider 2022-5-21

As always, my pleasure!

请先登录，再进行评论。

How can I add uncertainty to a data matrix?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

12 个评论
显示 10更早的评论隐藏 10更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

How can I add uncertainty to a data matrix?

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

12 个评论 显示 10更早的评论隐藏 10更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

12 个评论
显示 10更早的评论隐藏 10更早的评论