ARM Cortex M based custom Target development for simulink (for Texas Instruments TM4C1294XL Launchpad)

4 次查看（过去 30 天）
vaibhav gaharwar
vaibhav gaharwar 2022-6-5
Hello Sir
My name is Vaibhav Singh Gaharwar. I have
to build a separate hardware board based on Texas Instrument's evaluation board (EK-TM4C1294XL) which
contain ARM Cortex M4F based processor. I tried all the websites and materials as per my knowledge but
didn't find any usable information that can work practically.
as of now.. i am following these articles (This is step 1)
https://www.mathworks.com/help/supportpkg/armcortexm/ug/preliminary-steps.html
step 1 is fine and now i am going to step2 i.e.
https://www.mathworks.com/help/supportpkg/armcortexm/ug/create-the-framework.html after 2nd step i got
this..
>> tgt
tgt =
Target with properties:
Name: 'My ARM Cortex M Board Target'
Folder: 'c:/mytarget/TM4C'
ReferenceTargets: {[1×1 matlabshared.targetsdk.Target]}
Deployers: {}
BaremetalSchedulers: {}
OperatingSystems: {}
PIL: {}
ExternalMode: {}
Profilers: {}
AliasNames: {}
which means my 2nd step is also sucessful now i will move towards next stem i.e. 3rd step which is "Specify the Hardware" https://www.mathworks.com/help/supportpkg/armcortexm/ug/specify-the-hardware-1.html
then i got followling result..
>> testTarget(tgt,'hardware');
Test Summary:
===========================================================
TargetName: My ARM Cortex M Board Target
HardwareName: TM4C1294L Board
-----------------------------------------------------------
feature result
-----------------------------------------------------------
hardware Passed
===========================================================
See the workspace variable TM4C1294L_Board_TestResults for more information
>>
result of 3rd step shows my created device in hardware implementation pane my this step runs
perfectly...so i will move for 4th step which is Define and Activate Features
https://www.mathworks.com/help/supportpkg/armcortexm/ug/define-and-activate-features.html
this is theory step!!! nothing to do with MATLAB just understand it and move for next step which is
5th step "Activate the Application Deployment Feature"
https://www.mathworks.com/help/supportpkg/armcortexm/ug/activate-the-application-deployment-feature-
1.html
Then i got this..
Warning: 'm0' has been created in R2018b and is not compatible with
this release of MATLAB. Please recreate the target in R2020a before
attempting to register or use the target.
> In RTW/TargetRegistry/registerTargetInfosOnPath
In RTW/TargetRegistry/initialize
In RTW/TargetRegistry/getWithoutDataLoad
In RTW/TargetRegistry/getInstance
In slCustomizer/internalCustomizationSimulinkCoderCore>registerTargetInfo
In slCustomizer/internalCustomizationSimulinkCoderCore
In slCustomizer/callAllMethods
In slCustomizer/refresh
In slCustomizer.staticRefresh
In sl_refresh_customizations (line 24)
In codertarget.target.register
In matlabshared.targetsdk/Target/register
In matlabshared.targetsdk.saveTarget
In saveTarget (line 23)
>> testTarget(tgt,'deployer');
Test Summary:
===========================================================
TargetName: My ARM Cortex M Board Target
HardwareName: TM4C1294L Board
-----------------------------------------------------------
feature result
-----------------------------------------------------------
deployer Failed
===========================================================
See the workspace variable TM4C1294L_Board_TestResults for more information
>>
as you can notice in my test summary my deployer result is "failed"
at this point my work stopped and i dont know what to do next...
can you plz help me this 5th step which deployment .. so that i can remove this error and complete my PhD project..
regards

请先登录，再回答此问题。

回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Develop a Target 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by