Need to correct the matlab code for the question.

2 次查看(过去 30 天)
Write the Matlab code for the above question.
I have written the following code, but there is some error..after Power=Torque*angular velocity.
Error in code, "Invalid expression. Check for missing multiplication operator, missing or unbalanced delimiters, or other syntax error. To construct matrices, use brackets instead of parentheses. "
Power=Torque*angular velocity
clc;clear all;close all;
w=1000:10:6000;
%Engine 1
a=0.03;
b=7.5e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
hold on
figure(2)
plot(w,P/1000,'LineWidth',1.5)
hold on
%Engine 2
a=0.02;
b=3.333e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
figure(2)
plot(w,P/1000,'LineWidth',1.5)
%Engine 3
a=0.015;
b=1.875e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Torque (Nm)')
title('Torque Vs speed')
legend('Engine 1','Engine 2','Engine 3')
figure(2)
plot(w,P/1000,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Power (kW)')
title('Power Vs speed')
legend('Engine 1','Engine 2','Engine 3')
function T=torque(w,a,b)
T=120+a*(w-1000)-b*(w-1000).^2;
end

采纳的回答

Ghazwan
Ghazwan 2022-10-8
clc;clear all;close all;
w=1000:10:6000;
%Engine 1
a=0.03;
b=7.5e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
hold on
figure(2)
plot(w,P/1000,'LineWidth',1.5)
hold on
%Engine 2
a=0.02;
b=3.333e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
figure(2)
plot(w,P/1000,'LineWidth',1.5)
%Engine 3
a=0.015;
b=1.875e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Torque (Nm)')
title('Torque Vs speed')
legend('Engine 1','Engine 2','Engine 3')
figure(2)
plot(w,P/1000,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Power (kW)')
title('Power Vs speed')
legend('Engine 1','Engine 2','Engine 3')
function T=torque(w,a,b)
T=120+a*(w-1000)-b*(w-1000).^2;
end
  2 个评论
Ghazwan
Ghazwan 2022-10-8
you just need to remove the first line or put "%" at the beginning.
Vipul
Vipul 2022-10-8
I tried, but there is another here down
for following line
>> T=torque(w,a,b);
Unrecognized function or variable 'torque'.

请先登录,再进行评论。

更多回答(0 个)

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by