sh_cyl_cou​nterbalanc​e_valve example: artificial results when 0 input?

1 次查看（过去 30 天）
Chris Dizon
Chris Dizon 2022-10-14
回答： Yifeng Tang 2022-11-4
Using sh_cyl_counterbalance_valve to help diagnose my own model.
When inputting no load or flow rate to the example model, simscape results explorer shows that there is still pressure being exerted on blocks such as the valve, cylinder, damper, pressure relief valve, etc. There are large spikes at the beginning. I would expect with no input or load that nothing would happen.
I don't think this is a real output and is an artificial result? Why would this be happening, is there a way to prevent these sharp spikes?

请先登录，再回答此问题。

回答（1 个）

Yifeng Tang
Yifeng Tang 2022-11-4
Hi Chris,
I tried to make Load and Flow Rate blocks zero and seem to get what you saw as well. Look like the initial "spike" comes from the initial pressure set in the cylinders: 48e5 and 14e5 Pa. If you change those numbers, you will get less an initial spike.
To find out the actual initial conditions the model applies, you can try the variable viewer tool:
https://www.mathworks.com/help/simscape/ug/variable-viewer.html

类别

在 Help Center 和 File Exchange 中查找有关 Two-Phase Fluid Library 的更多信息

标签

产品


版本

R2022a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by