- This error message means that one of the signals in your model is diverging to plus or minus infinity or is otherwise changing too rapidly based on the solver settings.
- This means that with these settings, the solver is unstable for the equations represented by the model. It is a stiff model that requires more stability for the solver.
- One way to resolve this error is to reduce the maximum order for your model.
- You can refer to the following documentation link for more information on how to reduce the order of a model: https://www.mathworks.com/help/releases/R2022a/ident/ug/use-state-space-estimation-to-reduce-model-order.html
Caused by: Nonlinear iteration is not converging with step size reduced to hmin (1.07322E-15) at time 0.302084. getting this error could any help me out?
77 次查看(过去 30 天)
显示 更早的评论
An error occurred while running the simulation and the simulation was terminated
Caused by: Nonlinear iteration is not converging with step size reduced to hmin (1.07322E-15) at time 0.302084. Try reducing the minimum step size and/or relax the relative error tolerance.
Thanks for the help in advance. Appreciate your efforts.
0 个评论
回答(1 个)
Harshit Gupta
2022-11-14
Hi Shubham,
As per my understanding, you are getting the following error:
Nonlinear iteration is not converging with step size reduced to hmin (1.07322E-15) at time 0.302084. Try reducing the minimum step size and/or relax the relative error tolerance.
Please refer to the below pointers for more information about the same:
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Optimize Model Response 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!