S-Functions: ssWriteRTWParamSettings in mdlRTW does not work.

10 次查看（过去 30 天）
Eike
Eike 2011-2-23
Hey there,
I've got a problem regarding the inlining of some C S-Functions.
My S-Function expects some non tuneable parameters (e.g., "port_number"), which I try to write to the .rtw file in order to access them with my corresponding .tlc file.
My C Code looks as follows:
#define PORT_NUMBER (( uint8_T )( mxGetPr( ssGetSFcnParam( S , PORT_NUMBER_IDX ) )[ 0 ] ) + (uint8_T)1 )
static void mdlRTW(SimStruct *S)
{
if(!ssWriteRTWParamSettings (S, 1, SSWRITE_VALUE_NUM, "port_number", PORT_NUMBER))
{
return; /* An error occurred. */
}
}
I tried accessing the parameter with
%assign port_number = SFcnParamSettings.port_number
in my tlc file, but when building the model, I kept getting "unidentified identifier SFcnParamSettings".
Subsequently I searched the built .rtw file for "SFcnParamSettings", but nothing was found. Shouldn't there be a block with this title in it? For me it looks like the mdlRTW function wasn't executed correctly, but why?
And how can I check if it works?

请先登录，再回答此问题。

采纳的回答

Eike
Eike 2011-3-14
Note: This seems to be triggered by the same problem I encountered here. I built the model in my own development path using copies of all relevant files/libraries instead of doing so in the original project folder.
I do not know about Matlab's exact problem before, but building in the original folder solved the issue. Again, I find Matlab's error reporting kind of misleading.
With kind regards,
Eike

更多回答（2 个）

Kaustubha Govind
Kaustubha Govind 2011-2-23
I wonder if the write is failing becausing SSWRITE_VALUE_NUM requires a real_T value, but you are passing in a uint8_T value. You could try using ssWarning or ssPrintf inside your if condition to detect when ssWriteRTWParamSettings is unsuccessful.
Use SSWRITE_VALUE_DTYPE_NUM to write a SS_UINT8 type value, by passing in a void pointer to the same. See the documentation for more details.
Eike
Eike 2011-2-24
Thank you for your reply!
The issue regarding the data type sounds logical to me, I have corrected that one. I also tried doing some error handling using ssWarning, ssPrintf and fprintf (to create a log file), but none of these produced any output. And I still keep getting the "undefined Identifier SFcnParamSettings". How can I find out if my mdlRTW is used at all?
At the moment, my code looks like this:
#define MDL_RTW
static void mdlRTW(SimStruct *S)
{
ssWriteRTWParamSettings (S, 1, SSWRITE_VALUE_DTYPE_NUM, "port_number", &PORT_NUMBER, DTINFO(SS_UINT8, 0));
ssPrintf ("An error occured during .rtw generation!");
}
And I still don't get any output. I don't have to configure anything to use a mdlRTW function, do I? Just put the c and tlc file of same name in the workspace, and Matlab recognises both?
  3 个评论
显示 1更早的评论
Eike
Eike 2011-2-25
That's right, that was probably a flaw, I have corrected that one, too. Thanks!
However, there's still no SFcnParamSettings block in my model.rtw.
Fortunately, while searching, I noticed that the parameter does exist in the rtw-File including its value, just not under that name.
Now I'm using "%assign ::port_number = block.Parameter[1].Value[0] + 1", which works.
I have completely no clue why the SFcnParamSettings thing does not work for me, but I don't care anymore ;-)
Eike
Eike 2011-3-1
Appendix: I realized, that for this solution the mdlRTW function is completely irrelevant. I removed it from my C file and parameter passing still works.
Just if anyone's interested.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Simulink Coder 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by