Note that this is supposed to be a modification of the following code that does work...
Bii=B1{ii};
for ii= 1:N
Bii=B1{ii};
[x,y]=find(B1{ii}==max(max(B1{ii})));
[x,y]=find(B1{ii}==max(max(B1{ii})))
end
What's wrong with my for loop?....error is that matric dimensions must match.
1 次查看（过去 30 天）
显示 更早的评论
Bii=B1{ii};
for ii= 1:N
Bii=B1{ii};
[x,y]=find(B1{ii}==max(max(B1{ii})));
[X,Y]=find(B1{1}==max(max(B1{1})));
DIFF=[x,y]-[X,Y]
end
.....basically I'm assigning images to a matrix Bii....each image is an element of the matrix...and I'm trying to find the x,y coordinates of the brightest spot on each image and subtracting that of the first frame from each of them...
IT SAYS ERROR IN USING - (the minus sign)...MATRIX DIMENSIONS MUST AGREE.
采纳的回答
Fangjun Jiang
2011-10-22
The constructed matrix [x,y] and [X,Y] don't have the same size so you can't do subtraction. see
rand(3,1)-rand(2,4)
29 个评论
Yagnaseni Roy
2011-10-22
Hi,
I tried
for ii= 1:N
Bii=B1{ii};
[x,y]=find(B1{ii}==max(max(B1{ii})));
[X,Y]=find(B1{1}==max(max(B1{1})));
rand(x,y)-rand(X,Y)
end
AND IT DID WORK...
HOWEVER, I don't understand why the matrix dimensions of x,y and X,Y don't match, since they are essentially the same thing!
x,y is the brightest spot of the general ii th frame and X,Y is the brightest spot of the 1st frame....
Moreover, if my matrix dimensions really don't match, then according to maths, matrix subtraction is not possible if the matrix dimensions don't match...so how does rand function give me an output anyway? Does it manipulate in some way?
Yagnaseni Roy
2011-10-22
also, my matrix has exactly 480 frames, so i should get 479 output values....but I'm getting WAY more than that...i think there's something wrong! I'm not sure if the rand function is doing what its supposed to be doing!!
Fangjun Jiang
2011-10-22
FYI, rand(x,y) creates a x by y matrix with random numbers. I was providing an example to explain the error message.
[x,y] and [X,Y] are the same only when ii=1, the first iteration in the loop. Whether they are the same size depends on the data. Maybe there are duplicated maximum values. Run your code step by step, check the value of x,y,X,Y and you'll find the problem.
Walter Roberson
2011-10-22
And since [X,Y]=find(B1{1}==max(max(B1{1}))); does not change inside the loop, you might as well do that assignment outside of the loop.
I think it likely that your frames have multiple locations that have the maximum. If you could be sure that that was *not* the case, that you only had a single copy of each maximum, then you would not use that code at all: you would simply call max() with two output arguments as the second output argument will return the location of the maximum.
Yagnaseni Roy
2011-10-22
you're right....in one of the frames that i tested out separately, there were 4 pairs of x,y with the same maximum intensity...
is there any function/ modification of the max function that will allow me to filter out the largest out of all these for...
instead of iterating the max function 2 or 3 times, maybe there's a function that simply gives one single maximum for each frame, which would thus be the ultimate maximum?
Yagnaseni Roy
2011-10-22
I can use CPSELECT to open pairs of images at a time and locate the cell and calculate the difference between its positions...however, its involves manual effort...is it possible to put cpselect into a loop and that the cell gets located without any manual input?
Fangjun Jiang
2011-10-22
Will [x,y]=find([0 1 0 1 1],1,'first') solve the problem? In fact, if you use two input arguments for find(), you don't need to specify 'first'.
Walter Roberson
2011-10-22
[maxval, maxidx] = max(B1{ii}(:));
[x,y] = idx2sub(size(B1{ii},maxidx);
It does not make sense to talk about "the largest out of all these" where "these" are points that (have been discovered to) have the same intensity. "maximum" is a superlative. Something cannot be "more maximum" than something else.
The code I show above will return *one* of the locations that has the maximum value. If you care to dig in to the documentation for max(), you could even figure out which one amongst equals it would pick out, but it is not clear to me that that is going to matter. I don't think you really even care what the location is: I think all you need is (before the loop)
maxB11 = max(B1{1}(:));
and then in the loop
max(B1{ii}(:)) - maxB11
Yagnaseni Roy
2011-10-23
I PUT:
M=mmreader('cell.avi');
N= M.NumberOfFrames;
for ii = 1:N
A=imsubtract(M.read(1),M.read(ii));
B{ii}=rgb2gray(A);
[maxval, maxidx] = max(B{ii}(:));
[x,y] = idx2sub(size(B{ii},maxidx));
[x,y] = idx2sub(size(B{ii},maxidx));
end
IT SAID ERROR:
Undefined function 'idx2sub' for input arguments of type 'double'.
WHAT'S WRONG WITH IT?
Yagnaseni Roy
2011-10-23
PLEASE CHECK..
M=mmreader('cell.avi');
N= M.NumberOfFrames;
for ii = 1:N
A=imsubtract(M.read(1),M.read(ii));
B{ii}=rgb2gray(A);
[maxval, maxidx] = max(B{ii}(:));
[x,y] = ind2sub(size(B{ii},maxidx));
[x,y] = ind2sub(size(B{ii},maxidx));
end
ERROR SHOWN:
Error using ind2sub (line 35)
Not enough input arguments.
Yagnaseni Roy
2011-10-23
I got output! Thanks!
In the mathworks documentation, it says :'The ind2sub command determines the equivalent subscript values corresponding to a single index into an array.'
So in the code, max(B{ii}(:)); gives the X-Y COORDINATES of ONE the maximum intensity points on the picture, and ind2sub(size(B{ii}),maxidx); gives me the indices of that point??
One more thing...my array B has 480 frames...however, in the output, I got 336 columns....is there anything I need to be concerned about here?
Fangjun Jiang
2011-10-23
The opposite! [MaxValue, MaxValueIndex]=max() gives the linear index (or single index). ind2sub() converts it into subscripts (or X-Y coordinates as you say).
Yagnaseni Roy
2011-10-23
Thanks for the clarification!!
But why do I get 336 out put values whereas I have 480 frames?
Yagnaseni Roy
2011-10-23
M=mmreader('cell.avi');
N= M.NumberOfFrames;
for ii = 1:N
A=imsubtract(M.read(1),M.read(ii));
B{ii}=rgb2gray(A);
[maxval, maxidx] = max(B{ii}(:));
ind2sub(size(B{ii}),maxidx);
end
>> max(B{200})
...THATS THE CODE I ENTERED...AND THEN max(B{200})GAVE ME THE FOLLOWING OUTPUT..
ans =
Columns 1 through 17
14 10 8 12 9 8 7 10 10 12 7 5 8 8 6 5 4
Columns 18 through 34
4 10 4 4 4 6 4 4 7 4 7 10 9 9 13 8 11
Columns 35 through 51
10 9 7 6 11 9 7 7 8 5 5 6 7 12 9 6 8
Columns 52 through 68
8 11 6 5 10 7 9 8 9 12 12 11 13 13 10 15 9
Columns 69 through 85
8 7 11 13 15 11 10 10 9 16 13 13 7 13 13 9 10
Columns 86 through 102
11 16 15 11 8 8 14 11 15 24 32 28 13 18 14 11 12
Columns 103 through 119
11 14 9 7 8 10 14 15 8 7 7 8 13 6 11 9 8
Columns 120 through 136
9 5 13 11 10 9 11 13 11 12 12 7 13 9 15 16 8
Columns 137 through 153
9 8 15 13 18 8 7 10 13 14 10 8 7 6 9 13 12
Columns 154 through 170
7 7 11 14 8 6 10 10 16 7 11 13 8 9 13 14 12
Columns 171 through 187
11 7 14 18 8 9 12 11 7 8 7 6 9 8 10 11 11
Columns 188 through 204
12 11 8 9 9 11 12 14 12 12 10 9 14 6 17 10 12
Columns 205 through 221
8 7 8 12 11 11 12 10 12 10 13 12 9 8 8 12 9
Columns 222 through 238
15 13 12 14 9 9 9 12 7 7 10 12 14 7 11 11 8
Columns 239 through 255
20 15 13 12 14 16 10 9 12 8 9 11 10 11 12 8 11
Columns 256 through 272
12 9 13 10 9 8 16 15 9 11 10 8 9 5 6 5 11
Columns 273 through 289
9 12 10 11 9 5 6 8 15 8 7 8 8 7 9 7 8
Columns 290 through 306
6 5 5 4 3 5 6 10 7 5 11 13 9 7 10 9 9
Columns 307 through 323
6 7 5 4 6 6 9 5 4 4 5 6 7 8 4 10 7
Columns 324 through 336
6 5 7 4 5 7 7 10 7 6 5 6 10
Yagnaseni Roy
2011-10-23
>>M
Summary of Multimedia Reader Object for 'cell.avi'.
Video Parameters: 29.97 frames per second, RGB24 336x96.
480 total video frames available.
(SUMMARY OF MY VIDEO FILE WHOSE FRAMES HAVE BEEN STORED IN THE ARRAY)
Fangjun Jiang
2011-10-23
You have 480 frames. Each frame is 336x96. Maybe it should be 96x336 because if you run a=max(rand(96,336)), a will be 1x336 vector.
Yagnaseni Roy
2011-10-23
Oh no...but for each of the 480 frames, I need just one pair of x,y values that will give me the coordinates of the brightest spot there....even if there are multiple spots of the same max intensity, I just need x,y coordinates of one of them.
Fangjun Jiang
2011-10-23
Then you need to use max(B{200}(:))! In your code, you are using [maxval, maxidx] = max(B{ii}(:)). That is correct! Why did you run max(B{200})? Where did this 480 mis-match 336 question come from?
Walter Roberson
2011-10-23
You left off the (:) part of the code. max(B{200}(:)) asks for the maximum of B{200} after it has been reshaped to a single column vector. max(B{200}) on the other hand asks to find the maximum of B{200} along each column of B{200}, which will have an output that has as many elements as B has columns.
Yagnaseni Roy
2011-10-24
Hey thanks! this works...I get the maximum intensity...
However, what i need is the x,y coordinates of this point...
I tried [x,y]=find(max(B{200}(:)))
But even if I replace 200 by some other value, i get x=1, y=1!!
Fangjun Jiang
2011-10-24
That is not necessarily a problem. Maybe your data is like that. What you really need may be this.
x=zeros(480,1); y=zeros(480,1); % This is pre-allocate the X-Y for each frame.
Inside the for-loop, use [x(ii),y(ii)] = ind2sub(size(B{ii}),maxidx). That will give you all the X-Y.
Yagnaseni Roy
2011-10-24
yeah! But then all's well that ends well...hopefully this should bring an end to my project too...hope he doesn't ask me to modify it too much!!
Walter Roberson
2011-10-24
I did say hours ago that the code shown had no outputs. You were overwriting [x,y] each pass through the loop, and you were not doing anything calculated indices.
Memo for future reference: anything that appears un-indexed on the left-hand side of an assignment in a "for" loop will be overwritten on the next iteration. If you want the results to be saved for after the loop, you need an indexed assignment at some point in the loop.
更多回答（0 个）
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Logical 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!发生错误
由于页面发生更改，无法完成操作。请重新加载页面以查看其更新后的状态。
Translated by 
您也可以从以下列表中选择网站：
如何获得最佳网站性能
选择中国网站（中文或英文）以获得最佳网站性能。其他 MathWorks 国家/地区网站并未针对您所在位置的访问进行优化。
美洲
- América Latina (Español)
- Canada (English)
- United States (English)
欧洲
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom(English)
亚太
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)