load flow not converging if the load type is constant PQ

14 次查看（过去 30 天）
Kamilu Sanusi
Kamilu Sanusi 2023-3-9
评论： Kamilu Sanusi 2023-3-9
load flow not converging if the load type is constant PQ while load flow solution with respect to other static load types converges to expected result. The non converging iterating results also seen greater than the specified mechanical input
.Please what could be the problem?
Thank you

请先登录，再回答此问题。

回答（1 个）

Harsh Sanghai
Harsh Sanghai 2023-3-9
This could be the possible reason:
  1. Improper initialization of the load flow: If the load flow is not initialized properly, it can lead to convergence issues. Make sure that the load flow is initialized with the correct starting values for the variables.
  2. Insufficient number of iterations: The load flow may require a larger number of iterations to converge when the load type is constant PQ. Increase the number of iterations to see if that helps.
  3. Incorrect modeling of generator or mechanical input: If the generator or mechanical input is not modeled properly, it can lead to convergence issues. Check the generator and mechanical input models to make sure they are accurate.
  1 个评论
Kamilu Sanusi
Kamilu Sanusi 2023-3-9
@Harsh Sanghai thank you for the positive idea
@ 1, the iterations converges in 20 sec for other static loads so i dont think is the problem of initialization
@ 2, the number of iterations was not specified, while loop was used to specify the error tolerance, and i also tried to reduce the tolerance but still same
@ 3, mechanical input was not modelled, a constant mechanical input was used, governor model was not implemented
Thank you

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 MATLAB 的更多信息

标签

产品


版本

R2021a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by