Hi Payam,
As per my understanding you want to model PV system using real field data. From the information provided, I am assuming you have PV array outputs such as voltage, current and output power stored in an Excel file.
Kindly refer to the below steps to bring the data stored in excel sheet into Simulink and connect the data to Simscape Electrical blocks:
Read data into Simulink:
- Assuming you have also recorded time along with the PV array output data, you can use the “From Spreadsheet” block to read this data into Simulink.
- Refer to the following MathWorks documentation to appropriately format the data in Excel Sheet before reading it using “From Spreadsheet” block: https://www.mathworks.com/help/simulink/slref/fromspreadsheet.html
Use Simulink signals as source for the electrical components:
- The “From Spreadsheet” block provides each data column as separate Simulink signal.
- The voltage and current signals can be converted to their equivalent source using “Controlled Voltage Source” block and “Controlled Current Source” block respectively as shown below.
- Now these voltage and current source blocks can be connected to other electrical component blocks.
Please refer to the following MathWorks documentations for more information about the Simulink blocks used:
- “Controlled Voltage Source” block: https://www.mathworks.com/help/sps/powersys/ref/controlledvoltagesource.html
- “Controlled Current Source” block: https://www.mathworks.com/help/sps/powersys/ref/controlledcurrentsource.html
I hope this helps!
Best Regards,
Aishwarya
