how to read phase angle from AgInfiniiVision driver supported oscilloscope DSO- X2004A

2 次查看（过去 30 天）
RAJ KISHORE LAGURI
评论： RAJ KISHORE LAGURI 2023-6-9
>> fetchWaveformMeasurement(Dev_Osc,"Channel2", "MEASUREMENT_PHASE2")
Vendor Driver Error 0xBFFA0010: Invalid value (%1) for method %2, parameter %3.
>> fetchWaveformMeasurement(Dev_Osc,"Channel1", "MEASUREMENT_PHASE2")
Vendor Driver Error 0xBFFA0010: Invalid value (%1) for method %2, parameter %3.
>> fetchWaveformMeasurement(Dev_Osc,"Channel1","Channel2", "MEASUREMENT_PHASE2")
Error using ividev.AgInfiniiVision/fetchWaveformMeasurement
Too many input arguments.
>> fetchWaveformMeasurement(Dev_Osc,"Channel2", "VOLTAGE_PEAK_TO_PEAK")
ans =
0.3740
As in this code you can see that the command for VOLTAGE_PEAK_TO_PEAK is working but MEASUREMENT_PHASE2 for measuring phase differenece between two channel is not working. Please provide the solution for measuring phase angle.
  1 个评论
RAJ KISHORE LAGURI
RAJ KISHORE LAGURI 2023-6-9
AMPLITUDE
DUTY_CYCLE_NEG
DUTY_CYCLE_POS
FALL_TIME
FREQUENCY
MEASUREMENT_AREA2
MEASUREMENT_BURST_WIDTH2
MEASUREMENT_DELAY2
MEASUREMENT_FALLING_EDGE_COUNT2
MEASUREMENT_FALLING_PULSE_COUNT2
MEASUREMENT_FREQUENCY_COUNTER2
MEASUREMENT_PHASE2
MEASUREMENT_RISING_EDGE_COUNT2
MEASUREMENT_RISING_PULSE_COUNT2
MEASUREMENT_STANDARD_DEVIATION2
MEASUREMENT_TIME_AT_MAX2
MEASUREMENT_TIME_AT_MIN2
MEASUREMENT_TIME_AT_VALUE2
MEASUREMENT_TIME_OF_EDGE2
MEASUREMENT_VALUE_AT_TIME2
OVERSHOOT
PERIOD
PRESHOOT
RISE_TIME
VOLTAGE_AVERAGE
VOLTAGE_CYCLE_AVERAGE
VOLTAGE_CYCLE_RMS
VOLTAGE_HIGH
VOLTAGE_LOW
VOLTAGE_MAX
VOLTAGE_MIN
VOLTAGE_PEAK_TO_PEAK
VOLTAGE_RMS
WIDTH_NEG
WIDTH_POS
These are the measurement functions that we can use but MEASUREMENT_PHASE2 is not working

请先登录，再进行评论。

请先登录，再回答此问题。

回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Oscilloscopes 的更多信息

标签

产品


版本

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by