CAN Explorer and I/O 602 Speedgoat module

17 次查看（过去 30 天）

显示更早的评论

Gabriel 2023-6-16

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1984344-can-explorer-and-i-o-602-speedgoat-module

评论： Dimitri MANKOV 2024-7-23

How do I connect my speedgoat module I/O602 and read data bus on CAN Explorer?

I refresh all hardwares available and only MathWorks virtual are listed.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Dimitri MANKOV 2023-6-19

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1984344-can-explorer-and-i-o-602-speedgoat-module#answer_1258519

Hi Gabriel,

In short, you will need to insert the CAN driver blocks corresponding to your IO602 module in your model. These driver blocks are part of the Speedgoat I/O Blockset, which can be downloaded from your Speedgoat Customer Portal account.

You will also find product examples showing you how to use the IO602 module in the Speedgoat documentation here.

I hope this is helpful!

Dimitri

5 个评论
显示 3更早的评论隐藏 3更早的评论

Christoph Wellnhofer 2024-7-23

@Dimitri MANKOV

are there any plans that CAN Explorer supports Speedgoat harware?

According to the list Vehicle Network Toolbox Supported Hardware - MATLAB & Simulink - MathWorks Deutschland speedgoat hardware is still not supported. It would be extremly helpful (especially for development tests), if CAN Explorer can display all CAN traffic of speedgoat hardware

Dimitri MANKOV 2024-7-23

Hi @Christoph Wellnhofer,

As far as I know, this feature request has been submitted to the develpoment teams at Speedgoat and the MathWorks, but I do not know if or when this will be supported.

Best,

Dimitri

请先登录，再进行评论。

请先登录，再回答此问题。