Hi MD ABDUL,
Based on my understanding, it seems that you want to know why the model has lengthy simulation time for a single packet. The main reason behind this is the high fidelity of the analysis performed in the model as it is capturing a rich set of dynamics. In general, to reduce the simulation time, you should reduce the fidelity of the simulation. One way to reduce the fidelity of this example would be to decrease the ‘Oversampling Factor’ in the ‘Multirate Parameters’ block.
Currently, the model captures fifth-order harmonics. As explained in the example here:
As the current combined bandwidth in the model is 35 MHz, to capture the fifth-order harmonics we need to set an ‘Oversampling Factor’ of 10 to provide a sample rate of 200 MHz, which is greater than five times the combined bandwidth (35*5 = 175 MHz).
Suppose, you choose to only capture third-order harmonics. In this case, we only require 35*3 = 105MHz, so an ‘Oversampling Factor’ of 6 would do, because 20*6 = 120MHz is greater than 105MHz.
I hope this provides useful information for enabling you to simulate 1000 packets.
Best Regards,
Sachin
