Finding positive-, negative- and zero-sequence components in Matlab

Question

Ygor Marca 2023-9-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2018141-finding-positive-negative-and-zero-sequence-components-in-matlab

编辑： Ygor Marca 2023-9-11

Why the positive and negative sequence values are the same? What is wrong with the fortescue calculation and how to correct it? Up and Un should not be equal.

Code and plot:

f1=50; %Hz

w1 = 2*pi*f1;

hatUa = 25000*sqrt(2)/sqrt(3);

t = linspace(0,1,100000);

a = cos(2*pi/3) + 1i*sin(2*pi/3);

Ua = (hatUa.*(exp(1i.*w1.*t)+exp(-1i.*w1.*t))./2);

Ub = (hatUa.*(exp(1i.*w1.*t + 1i.*2*pi/3)+exp(-1i.*w1.*t - 1i.*2*pi/3))./2);

Uc = (0.5.*hatUa.*(exp(1i.*w1.*t - 1i.*2*pi/3)+exp(-1i.*w1.*t + 1i.*2*pi/3))./2);

Up = real(Ua + (a*Ub) + (a.*a*Uc))./3;

Un = real(Ua + (a.*a.*Ub) + (a.*Uc))./3;

U0 = real(Ua + Ub + Uc)./3;

subplot(2,1,1),plot(t,Ua,'LineWidth',2)

xlim([0 0.1])

xlabel ('Time [s]')

ylim([-hatUa*1.1 hatUa*1.1])

ylabel ('Three-phase Voltage (V)')

hold on

subplot(2,1,1),plot(t,Ub,'LineWidth',2)

hold on

subplot(2,1,1),plot(t,Uc,'LineWidth',2)

legend( 'Ua', 'Ub', 'Uc')

hold on

subplot(2,1,2),plot(t,Up,'LineWidth',2)

xlim([0 0.1])

xlabel ('Time [s]')

ylim([-hatUa*1.1 hatUa*1.1])

ylabel ('P, N and 0 Voltages (V)')

hold on

subplot(2,1,2),plot(t,Un,'LineWidth',2)

hold on

subplot(2,1,2),plot(t,U0,'LineWidth',2)

legend( 'Up', 'Un', 'U0')

5 个评论
显示 3更早的评论隐藏 3更早的评论

the cyclist 2023-9-7

在 MATLAB Online 中打开

Here is a simplified version of the code that retains the essence of the question. (Up and Un are equal at all points, to within floating-point precision, and therefore plot on top of each other.)

I changed and/or removed some constants, e.g. setting hatUa to 1 (effectively and then actually removing it).

I have not debugged further, but I think a logical next step would be to calculate the real and imaginary parts separately. I think this will more directly reveal that Up and Un are equal.

@Ygor Marca, do you have a reference for these equations?

w1=pi;

t = linspace(0,1,100);

a = cos(2*pi/3) + 1i*sin(2*pi/3);

Ua = ((exp(1i.*w1.*t)+exp(-1i.*w1.*t))./2);

Ub = ((exp(1i.*w1.*t + 1i.*2*pi/3)+exp(-1i.*w1.*t - 1i.*2*pi/3))./2);

Uc = (0.5.*(exp(1i.*w1.*t - 1i.*2*pi/3)+exp(-1i.*w1.*t + 1i.*2*pi/3))./2);

Up = real(Ua + (a*Ub) + (a.*a*Uc))./3;

Un = real(Ua + (a.*a.*Ub) + (a.*Uc))./3;

figure

hold on

plot(t,Up,'LineWidth',2)

plot(t,Un,'LineWidth',2)

xlabel ('Time [s]')

ylabel ('P, N and 0 Voltages (V)')

legend( 'Up', 'Un')

dpb 2023-9-7

在 MATLAB Online 中打开

w1=pi;

t = linspace(0,1,100)';

a = cos(2*pi/3) + 1i*sin(2*pi/3);

Ua = ((exp(1i.*w1.*t)+exp(-1i.*w1.*t))./2);

Ub = ((exp(1i.*w1.*t + 1i.*2*pi/3)+exp(-1i.*w1.*t - 1i.*2*pi/3))./2);

Uc = (0.5.*(exp(1i.*w1.*t - 1i.*2*pi/3)+exp(-1i.*w1.*t + 1i.*2*pi/3))./2);

Up = real(Ua + (a*Ub) + (a.*a*Uc))./3;

Un = real(Ua + (a.*a.*Ub) + (a.*Uc))./3;

subplot(2,1,1)

plot(t,[real([a*Ub a.*a*Uc]) imag([a*Ub a.*a*Uc])])

legend('R(a.*Ub)','R(a.*a*Uc)','I(a.*Ub)','I(a.*a*Uc)','location','eastoutside')

ylim([-1 1])

subplot(2,1,2)

plot(t,[real([a.*a.*Ub a.*Uc]) imag([a.*a.*Ub a.*Uc])])

ylim([-1 1])

legend('(R(a.*a*Ub)','R(a.*Uc)','(I(a.*a*Ub)','I(a.*Uc)','location','eastoutside')

Shows they're all mirror images of each other...

Ygor Marca 2023-9-11

I don't get it, why didn't you plot Up and Un?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

David Goodmanson 2023-9-8

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2018141-finding-positive-negative-and-zero-sequence-components-in-matlab#answer_1305506

编辑：David Goodmanson 2023-9-10

在 MATLAB Online 中打开

Hi Ygor,

I believe the problem is that you are going too soon to real values for Ua,Ub,Uc. In

Ua = ((exp(1i.*w1.*t)+exp(-1i.*w1.*t))./2)

if you ignore the second term (which makes Ua real) and the factor of 1/2 that goes along with it, and also temporarily drop the factor of exp(1i.*w1.*t) in the first term, which is the time dependent part common to all the phases, you are left with Ua = 1. Similarly Ub has a factor of exp(1i.*2*pi/3) = a, and Uc has a factor of a^(-1) = a^2 [which is true since a^3 = 1]. So in terms of column vectors

[Ua; Ub; Uc] = [1; a; a^2/2]

i.e. a complex quanitity.

( I forgot to mention that hatUa has been temporarily dropped. Since it's a common factor, it can be multiplied into all the resulting coefficients U0,U+,U- at the end ).

Now the positive sequence is [1; a^2; a] , the negative sequence is [1; a; a^2] so

[Ua   = [1  1  1       [U0    
 Ub      1 a^2 a    *   U+
 Uc]     1  a  a^2]     U-]
The matrix is proportional to a unitary matrix so
[U0   =         [1   1   1     [Ua    
 U+     (1/3) *  1   a  a^2  *  Ub
 U-]             1  a^2  a]     Uc]
 

and if you code this up you get

U0plusminus =
   0.0833 + 0.1443i    % U0
   0.0833 - 0.1443i    % U+
   0.8333 + 0.0000i    % U-
A =                    % amplitudes, same order 
    0.1667             
    0.1667               
    0.8333             
theta =                % phases, same order
    1.0472             % 60 degrees 
   -1.0472
    0.0000

With the final result

U0plusminus = hatUa*U0plusminus
A = hatUa*A 

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Ygor Marca 2023-9-11

编辑：Ygor Marca 2023-9-11

在 MATLAB Online 中打开

Thank you for the answer. You really helped me.

hatUa=10;
a = cos(2*pi/3) + 1i*sin(2*pi/3);
Ua =hatUa;
Ub = a.*a.*hatUa;
Uc = 1.*a.*hatUa;
Up = abs(Ua + (a.*Ub) + (a.*a*Uc))./3
Up = 10
Un = abs(Ua + (a.*a.*Ub) + (a.*Uc))./3
Un = 2.5121e-15
U0 = abs(Ua + Ub + Uc)./3
U0 = 1.3240e-15

请先登录，再进行评论。

Finding positive-, negative- and zero-sequence components in Matlab

5 个评论
显示 3更早的评论隐藏 3更早的评论

采纳的回答

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

更多回答（0 个）

社区

另请参阅

类别

标签

Community Treasure Hunt

Finding positive-, negative- and zero-sequence components in Matlab

5 个评论 显示 3更早的评论隐藏 3更早的评论

采纳的回答

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

更多回答（0 个）

社区

另请参阅

类别

标签

Community Treasure Hunt

5 个评论
显示 3更早的评论隐藏 3更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论