IWR1843BOOST Parameter: "ElevationResolution value: NaN", which causes the z axis missing in 3D point cloud data.

3 次查看（过去 30 天）
Senhao
Senhao 2023-10-25
回答： Gayatri Menon 2024-5-6
Device: TI IWR1843BOOST
SDK version: 3.06
Test procedures: 1. Use hardware setup to flash the bin and load the cfg file (generated from mmWave demo visualizer 3.6.0).
2. Run mmWaveRadar() to read the properties on the device.
The value of the mmWaveRadar() output:
val =
BoardName: "TI IWR1843BOOST"
ConfigPort: "COM5"
DataPort: "COM6"
ConfigFile: "C:\ProgramData\MATLAB\SupportPackages\R2023b\toolbox\target\supportpackages\timmwaveradar\configfiles\xwr18xx_BestRangeRateResolution_UpdateRate_10.cfg"
MMWave SDK Version: "03.06.00.00"
SensorIndex: 1
MountingLocation: [0, 0, 0] (m)
MountingAngles: [0, 0, 0] (degrees)
UpdateRate: 10 (samples/s)
RangeResolution: 2.142656e-01 (m)
RangeRateResolution: 3.849848e-02 (m/s)
AzimuthResolution: 1.447751e+01 (degrees)
ElevationResolution: NaN (degrees)
MaximumRange: 1.371300e+01 (m)
MaximumRangeRate: 2.463903e+00 (m/s)
The ElevationResolution is NaN.
However, the 3D point cloud data can be correctly read from Demo visualizer but fails to be read in the MATLAB. Is there any differences from the cfg extract procedure in MATLAB?

请先登录，再回答此问题。

回答（1 个）

Gayatri Menon
Gayatri Menon 2024-5-6
AWR1843BOOST is not a supported TI Radar board by the support package. However, with a few minor changes to the code, you may be able to get AWR1843BOOST to function with the support package in MATLAB.
Please contact Mathworks technical support for further assistance on this.
Thanks,
Gayatri

类别

在 Help Center 和 File Exchange 中查找有关 Connectivity to TI mmWave Radar Sensor EVMs 的更多信息

标签

产品


版本

R2023b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by