The issue was in the usage of the SD to load the bitstream, it was initially used on a Linux system, I reformatted the SD on windows using a tool like SD Card Formatter. And then loaded the image again during the FPGA setup for the ZCU111, following this, the SD Card contained the UBoot.env file.
SoC Builder Error: Cannot Initialize Environment
5 次查看(过去 30 天)
显示 更早的评论
Matlab: R2022b
Vivado: 2020.2
Device: Xilinx ZCU111 RFSoC
OS: Windows 11
I'm executing the https://www.mathworks.com/help/soc/ug/5GNRCellSearchUsingXilinxRFSoCDevice.html example on the ZCU 111 RFSoC. When loading the bitsream I encounter the error:
Error executing command "mw_setboot /tmp/hdlcoder_rd/soc_5GNRMIBRecovery_top-XilinxZynqUltraScale_RFSoCZCU111EvaluationKit.bit /tmp/hdlcoder_rd/soc_prj.output.dtb /tmp/hdlcoder_rd "" ". Details: STDERR: Cannot open /mnt/uboot.env: No such file or directory Error: environment not initialized STDOUT: # Copied /tmp/hdlcoder_rd to /mnt/hdlcoder_rd # Copying Bitstream soc_5GNRMIBRecovery_top-XilinxZynqUltraScale_RFSoCZCU111EvaluationKit.bit to /mnt/hdlcoder_rd ERROR: Failed to set the target bitstream
Using PuTTy to setup serial commandline on the hardware:
The file indeed doesn't exist in the directory, I am not familiar with UBoot. But I do know in csh you'd have a setenv command to set it up. I'm not sure how to proceed in case of bash. Any help is appreciated.
0 个评论
采纳的回答
更多回答(0 个)
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!