How to add RF energy harvesting to a sensor?

8 次查看（过去 30 天）
hassan
hassan 2023-11-6
回答： UDAYA PEDDIRAJU 2024-8-30
I am using leach protocol and want to add capability of RF energy harvesting to each sesnor node. In NS3, just some line of codes are used to add the RF energy harvesting capability to each node. Deos there is any code that add RF EH to sensor?
  1 个评论
Umar
Umar 2024-6-25
Hi Hassan, Here is a simplified example of how you can integrate RF energy harvesting capabilities into sensor nodes using NS3: `
// Include necessary headers
#include "ns3/energy-harvester-module.h"
// Create an EnergyHarvester object for RF energy harvesting Ptr<EnergyHarvester> rfHarvester = CreateObject<RfEnergyHarvester> ();
// Attach the EnergyHarvester object to each sensor node
for (uint32_t i = 0; i < numNodes; ++i) { Ptr<Node> node = NodeList::GetNode(i); Ptr<BasicEnergySource> basicSource = CreateObject<BasicEnergySource> ();
basicSource->SetEnergyHarvester(rfHarvester);
node->AggregateObject(basicSource); }
The above code is a basic implementation of adding RF energy harvesting capability to sensor nodes in NS3. It creates an EnergyHarvester object specifically for RF energy harvesting and attaches it to each sensor node in the simulation scenario.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

UDAYA PEDDIRAJU
UDAYA PEDDIRAJU 2024-8-30
Hi hassan,
To simulate RF energy harvesting in MATLAB, you can use the RF toolbox. The RF Toolbox provides functions for analyzing, designing, and simulating RF systems .
Here's a general approach:
  • Create a Simulink Model: Set up a Simulink model with a sensor node, a power source, and an energy storage component.
  • Model RF Energy Harvesting: Use Simulink blocks (e.g., Gain, Sum, Integrator) to represent the RF energy harvesting process. Model the power received from the RF source and the energy stored in the battery.
  • Implement Leach Protocol: Incorporate the Leach protocol logic into your model, including cluster formation, data transmission, and energy consumption.
  • Simulate: Run the simulation to observe the effects of RF energy harvesting on the sensor network's performance.
Key Considerations:
  • RF Energy Source: Model the RF energy source (e.g., base station) and its characteristics.
  • Propagation Model: Use a suitable propagation model to calculate the received power at the sensor node.
  • Antenna Characteristics: Consider the antenna gain and efficiency of both the transmitting and receiving devices.
  • Energy Storage: Model the battery or other energy storage component.
  • Leach Protocol Implementation: Ensure accurate implementation of the Leach protocol's clustering, data aggregation, and energy consumption mechanisms.
Refer to the following links for documentation: RF Toolbox: https://www.mathworks.com/help/rf/

类别

在 Help Center 和 File Exchange 中查找有关 RF Toolbox 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by