Model of FFT in power systems
7 次查看(过去 30 天)
显示 更早的评论
Anyone know how to model the FFT of the voltage singal of a power system?
The need for this model is to simulate the phasor estimation of the protective relay by using DFT model
I already have the model of the power system and took a mesurement of the voltage on a transmission line (220kV, 50Hz).
Now I want to take this voltage signal and find its frequency-domain FFT by first converting it to discrete time by a sampling time Ts of 1/600 s (sampling frequency of 600Hz) after that I used a buffer and then the FFT block like this
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1537365/image.png)
Paramters
Zero-Order Hold Sample time = 1/600
Output buffer size ( per channel= 600
and didn't make any change to the FFT block
but something is not going right
- it gives a magnitudes of order 10^7 while the peak amplitude of the voltage is 220kV*sqrt(2) nearly 311126 V
- Also the frequency axis is not right, I don't see the fundamental frequency of 50 Hz of the original wave
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1537370/image.png)
Is there any changes I could make to make this go right?
0 个评论
回答(0 个)
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Spectral Analysis 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!