Find a controller for a feedback-loop

2 次查看（过去 30 天）
Davide
Davide 2024-3-5
评论： Davide 2024-3-6
Ran in:
We are working on an automation project to stabilize the altitude of an airplane. However, we've encountered an issue that seems unsolvable for us, at least for the moment, in the final phase of this project. After identifying the transfer function G shown below,
G(s) =
1.5284e-05 (s+4.288) (s-4.286)
--------------------------------
s (s+4.142) (s-4.14) (s+0.00053)
%% Plant, G
s = tf('s');
G = zpk((1.5284e-05*(s + 4.288)*(s - 4.286))/(s*(s + 4.142)*(s - 4.14)*(s + 0.00053)))
G = 1.5284e-05 (s+4.288) (s-4.286) -------------------------------- s (s+4.142) (s-4.14) (s+0.00053) Continuous-time zero/pole/gain model.
which has a positive pole, we attempted to create a feedback loop to achieve stability. We used the Sisotool's auto-tuning method LGQ and obtained a controller C_i to multiply with G, resulting in the function G_i.
C_i =
-9.4134e08 (s+4.142) (s+0.02969) (s^2 - 0.02844s + 0.001059)
------------------------------------------------------------
s (s+28.99) (s+4.288) (s^2 - 14.21s + 513.2)
%% LQG controller
Ci = zpk((-9.4134e08*(s + 4.142)*(s + 0.02969)*(s^2 - 0.02844*s + 0.001059))/(s*(s + 28.99)*(s + 4.288)*(s^2 - 14.21*s + 513.2)))
Ci = -9.4134e08 (s+4.142) (s+0.02969) (s^2 - 0.02844s + 0.001059) ------------------------------------------------------------ s (s+28.99) (s+4.288) (s^2 - 14.21s + 513.2) Continuous-time zero/pole/gain model.
Gc =
-14387 (s-4.286) (s+4.288) (s+4.142) (s+0.02969) (s^2 - 0.02844s + 0.001059)
-------------------------------------------------------------------------------------------
(s+0.7861) (s+4.088) (s+4.193) (s^2 + 8.283s + 17.15) (s^2 + 0.5465s + 0.1494) (s^2 + 1.171s + 0.9972)
%% Closed-loop system
Gcl = feedback(Ci*G, 1)
Gcl = -14387 (s-4.286) (s+4.288) (s+4.142) (s+0.02969) (s^2 - 0.02844s + 0.001059) ------------------------------------------------------------------------------------------------------ (s+4.142) (s+4.288) (s+5.152) (s^2 + 0.4575s + 0.09035) (s^2 + 0.4008s + 0.5998) (s^2 + 4.63s + 6.944) Continuous-time zero/pole/gain model.
step(Gcl, 60), grid on
Now, our current challenge is to find a controller C to apply within our closed-loop system, ensuring that we meet the project's requirements without compromising the stability achieved in the previous steps. Below are the requirements.
Requirements: Perfect tracking of constant references for output variation, with a response time not exceeding 15 seconds and any oscillations within 10% of the steady-state value.
After several attempts, it seems that there isn't any value capable of keeping the system stable while having a pole at zero. Is there any suggestion to overcome this problem? We can send the MATLAB code or the PDF with all the steps taken until the derivation of the G(s) function.

请先登录，再回答此问题。

采纳的回答

Sam Chak
Sam Chak 2024-3-5
编辑：Sam Chak 2024-3-5
Ran in:
Hi @Davide
Sometimes, it can be time-consuming to find a suitable controller that stabilizes unstable non-minimum phase systems while also meeting the performance requirements. In the case of a 4th-order plant, using a compensator of the same order is often the first line of defense against instability, as a higher-order controller can sometimes overkill. With that in mind, could you please evaluate whether the following step response performance is satisfactory?
s = tf('s');
%% Plant, Gp
Gp = zpk((1.5284e-05*(s + 4.288)*(s - 4.286))/(s*(s + 4.142)*(s - 4.14)*(s + 0.00053)))
Gp = 1.5284e-05 (s+4.288) (s-4.286) -------------------------------- s (s+4.142) (s-4.14) (s+0.00053) Continuous-time zero/pole/gain model.
%% Compensator, Gc
cz = [-4.30348002560136;
-0.000283361299755098 + 0.00216280953262624i;
-0.000283361299755098 - 0.00216280953262624i];
cp = [ 5.56024649650068 + 12.7047387632996i;
5.56024649650068 - 12.7047387632996i;
-14.6428725917671;
-4.51120949748476];
ck = -180243364.417473;
Gc = zpk(cz, cp, ck)
Gc = -1.8024e08 (s+4.303) (s^2 + 0.0005667s + 4.758e-06) --------------------------------------------------- (s+14.64) (s+4.511) (s^2 - 11.12s + 192.3) Continuous-time zero/pole/gain model.
%% Closed-loop system, Gcl
Gcl = feedback(Gc*Gp, 1);
%% Pre-filter, Gf
fz = [];
fp = [-0.000283361299755046 + 0.00216280953262625i;
-0.000283361299755046 - 0.00216280953262625i;
-4.30348002560136;
-4.28800000000001];
fk = 8.78016218952211e-05;
Gf = zpk(fz, fp, fk)
Gf = 8.7802e-05 -------------------------------------------------- (s+4.288) (s+4.303) (s^2 + 0.0005667s + 4.758e-06) Continuous-time zero/pole/gain model.
%% Filtered Closed-loop system
Gfc = tf(minreal(series(Gf, Gcl)))
Gfc = -0.2419 s + 1.037 --------------------------------------------------------------------------------------------- s^8 + 8.036 s^7 + 28.25 s^6 + 56.76 s^5 + 71.27 s^4 + 57.28 s^3 + 28.77 s^2 + 8.256 s + 1.037 Continuous-time transfer function.
S = stepinfo(Gfc);
step(Gfc, 60), grid on
xline(S.SettlingTime, '--', sprintf('Settling Time: %.3f sec', S.SettlingTime), 'color', '#7F7F7F', 'LabelVerticalAlignment', 'bottom')
  2 个评论
Davide
Davide 2024-3-6
Thanks a lot for this answer, at the end we have benn able to found a controller but the one showed by you is way better, thanks again for the help.
Davide
Davide 2024-3-6
Especially for the tip to use a compensator of the same order.

请先登录，再进行评论。

更多回答（1 个）

Mathieu NOE
Mathieu NOE 2024-3-5
Ran in:
hello
engineering is a mix of knowledge and art. The art of the engineer is to split a complex problem into smaller , simpler tasks. Or check if the complex model can be simplified before we jump into controller design tasks...
here you see that some zeroes and poles are numerically very close (we say "zero poles cancellation - or almost")
If you make the Bode plot you would immediately see that what seemed a complex TF can be viewed as a simple integrator + first order low pass filter. I have no doubt that you can easily design a PID (even just a P) controller in that case
here the two Bode plots overlay perfectly
%% Plant, G
s = tf('s');
G = zpk((1.5284e-05*(s + 4.288)*(s - 4.286))/(s*(s + 4.142)*(s - 4.14)*(s + 0.00053)));
% Bode plot
freq = logspace(-9,3,100);
[g,p] = bode(G,2*pi*freq);
g = squeeze(g);
p = squeeze(p);
% Simplifed TF = 1.5284e-05/(s*(s + 2*pi*fc))
fc = interp1(p,freq,-135); % second pole of simplified TF
G1 = zpk(1.5284e-05/(s*(s + 2*pi*fc)));
[g1,p1] = bode(G1,2*pi*freq);
g1 = squeeze(g1);
p1 = squeeze(p1);
figure(1)
subplot(2,1,1),semilogx(freq,20*log10(g),'b',freq,20*log10(g1),'*r');
subplot(2,1,2),semilogx(freq,p,'b',freq,p1,'*r');
  1 个评论
Davide
Davide 2024-3-6
Thanks a lot, for both, fixed my message and the answer. We easily found a stable controller on the first try as you expected.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Classical Control Design 的更多信息

标签

产品


版本

R2022a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by