Hi Neil,
From your post, my understanding is that you are experiencing an issue with deploying code to the F28379D LaunchPad using Simulink, where the debug probe setting seems to have inadvertently changed from XDS100v2 to XDS100v1.
In the attached snapshot, the error you've encountered suggests two possible points of failure: a complication with the debug probe or a mismatch in the processor configuration. To address this accurately, it is essential to examine the target configuration file (*.ccxml), which has the necessary settings for your target, including both the debug probe and processor configurations.
To locate and verify the target configuration file in use by your model, please follow these instructions: Open your Simulink model and navigate via the Toolstrip to HARDWARE > Hardware Settings > Hardware Implementation > Target hardware resources > CCS hardware configuration file.
Do refer to the following MATLAB R2022A documentation link on how to set the correct target configuration file for your model - https://www.mathworks.com/help/releases/R2022a/supportpkg/texasinstrumentsc2000/ref/sect-hw-imp-pane-c28x-build-options.html?searchHighlight=c28x-build&s_tid=doc_srchtitle#:~:text=code%20generation%20folder.-,CCS%20hardware%20configuration%20file,-In%20the%20Support
Thanks,
Raghava
