Hi Weijie,
To calculate the intersection line of two planes derived frrom point cloud data in MATLAB, you can follow these steps:
1.Load the Point Clouds
ptCloud1 = pcread('pointCloud1.ply');
ptCloud2 = pcread('pointCloud2.ply');
2. Fit a plane to each point cloud using the "pdfitplane" function. Adjust "maxDistance" based on your data's noise level:
maxDistance = 0.1; % Adjust based on your data's noise level
[model1, inliers1] = pcfitplane(ptCloud1, maxDistance);
[model2, inliers2] = pcfitplane(ptCloud2, maxDistance);
3. Obtain the normal vectors and a representative point on each plane, typically using the centroid of the inliers:
normal1 = model1.Normal;
point1 = mean(ptCloud1.Location(inliers1, :), 1);
normal2 = model2.Normal;
point2 = mean(ptCloud2.Location(inliers2, :), 1);
4. Calculate the intersection line. The direction is given by the cross product of the two normal vectors. Solve for a point on the line where the planes intersect:
lineDir = cross(normal1, normal2);
A = [normal1; normal2];
b = [dot(normal1, point1); dot(normal2, point2)];
linePoint = A \ b; % Solve for a point on the line
5. Visualize the results by plotting the point clouds and the intersection line:
figure;
pcshow(ptCloud1.Location, 'r'); % Red for point cloud 1
hold on;
pcshow(ptCloud2.Location, 'y'); % Yellow for point cloud 2
% Plot the intersection line
t = -50:0.1:50; % Parameter range for line
lineX = linePoint(1) + t * lineDir(1);
lineY = linePoint(2) + t * lineDir(2);
lineZ = linePoint(3) + t * lineDir(3);
plot3(lineX, lineY, lineZ, 'b-', 'LineWidth', 2); % Blue line
xlabel('X'); ylabel('Y'); zlabel('Z');
title('Intersection Line of Two Point Clouds');
grid on;
hold off;
Ensure the planes are not parallel; if they are, the cross product of their normal vectors will be zero, indicating no unique intersection line. Adjust the "maxDistance" parameter based on the noise level in your point cloud data for optimal plane fitting.
For more information, refer to the following MathWorks documentation links:
- pcfitplane: https://mathworks.com/help/releases/R2024a/vision/ref/pcfitplane.html
- pcread: https://mathworks.com/help/releases/R2024a/vision/ref/pcread.html
Hope this helps.
