Communication between MATLAB and Crazyflie

28 次查看（过去 30 天）
Shivam Bajpai
Shivam Bajpai 2024-7-17
回答： Mourya T 2024-8-18
I want to send commands from MATLAB/Simulink to Crazyflieb 2.0. How can I do it?

请先登录，再回答此问题。

回答（2 个）

Anagha Mittal
Anagha Mittal 2024-7-19
Hi,
For MATLAB and Simulink to communicae with Crazyflie, it is important that you have the UAV Toolbox installed which is required for MAVLink support.
To start understanding the simulation environment and way to configure your model, you may download the MATLAB File Exchange example "Crazyflie Quadcopter Simulation Using Simmechanics" from the following link:
https://www.mathworks.com/matlabcentral/fileexchange/65469-crazyflie-quadcopter-simulation-using-simmechanics
This has an example MATLAB file by the name "Crazyflie_Param". You may set the parameters similarly.
Next, to communicate you may setup MAVLink Connection by using the "mavlinkio" function. Refer to the following documentation link for more details on MAVLink Support:
https://www.mathworks.com/help/uav/mavlink-support.html
This will help you in setting up the environment.
Hope this helps!
Mourya T
Mourya T 2024-8-18
I am planning on using ros toolbox and crazyswarm, so then publishing directly on cmdFullStateMsg would work, where the trajectory planning or other pipeline can be implemented in matlab for testing.
cmdFullStateMsg = rosmessage("crazyflie_driver/FullState");
I found another thread related to sending rosmessage to crazyflie as below,
https://www.mathworks.com/support/search.html/answers/660433-populating-ros-messages-is-slow.html?fq%5B%5D=asset_type_name:answer&fq%5B%5D=category:ros/ros2-in-matlab&page=1
Hope this helps.

类别

在 Help Center 和 File Exchange 中查找有关 PX4 Autopilots 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by