What types of components should be connected to the interfaces of the fault(three-phase) module?

Question

peter 2024-9-25，8:26

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2155310-what-types-of-components-should-be-connected-to-the-interfaces-of-the-fault-three-phase-module

评论： peter 2024-9-26，1:37

What components should be connected to the external trigger of the faulty (three-phase) module? I think it should be input control signals, such as step modules, PWM modules, or signal generators. But the interface of the faulty module is triangular, and none of the above matches and cannot be connected. Should I choose other modules? How do I still need to convert it? Another interface is the three-phase composite interface, which directly includes the ABC three-phase, which makes it impossible for me to connect this faulty module to my three-phase circuit. Even if I tried to combine the three phases with mux, I couldn't connect to the symbol interface. Can this interface only connect components such as programmable voltage sources that are also three-phase composite interfaces?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Raghava S N 2024-9-25，10:10

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2155310-what-types-of-components-should-be-connected-to-the-interfaces-of-the-fault-three-phase-module#answer_1522385

编辑：Raghava S N 2024-9-25，10:10

Hello Peter,

The “Fault (Three-Phase)” block is a Simscape electrical block whose inputs are physical signals, which are different to regular Simulink Signals. Input control signals, such as step modules, PWM modules, or signal generators must be converted to physical signals before being fed to the Externally triggered fault control input (“F”) port of the Fault block. For more information about physical signals, refer to this link - https://www.mathworks.com/help/simscape/ug/basic-principles-of-modeling-physical-networks.html.

To connect Simulink Sources to Simscape diagrams, follow the workflow described in this link - https://www.mathworks.com/help/simscape/ug/connecting-simscape-diagrams-to-simulink-sources-and-scopes.html.

To address the second query about the composite three-phase port, the “Modelling Option” block parameter can be changed to “Expanded three-phase ports”. Open the block parameters of the “Fault (Three-Phase)” by double clicking on the block. In the “Modelling Option” drop-down field, choose “Expanded three-phase ports”. This will enable the three different phases (“a”, “b”, and “c”) separately, and they will be visible as individual ports on the block which can then be connected to the three-phase circuit. For more information about three-phase ports, refer to this link - https://www.mathworks.com/help/sps/ug/three-phase-ports.html.