default size figures with subplot

Question

Kamuran 2015-5-19

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/217605-default-size-figures-with-subplot

评论： Kamuran 2015-5-20

I would like to combine couple or three figures into a single window but when I use subplot(2,1,1) and subplot(2,1,2) I get two long ones or subplot(1,2,1) and subplot(1,2,2) I get two tall ones. I just want two figures side by side with their default size.

Is that possible? if so, how ? :D

Thanks

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Joseph Cheng 2015-5-19

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/217605-default-size-figures-with-subplot#answer_179702

在 MATLAB Online 中打开

yeah very simple.

hfig = figure;
pos = get(hfig,'position')
set(hfig,'position',pos.*[.5 1 2 1])
subplot(1,2,1),plot(randi(10,10,2))
subplot(1,2,2),plot(randi(10,10,2))

2 个评论
显示无隐藏无

Joseph Cheng 2015-5-19

在 MATLAB Online 中打开

well some additional playing around with it like

numplots = 4;
hfig = figure;
pos = get(hfig,'position')
set(hfig,'position',pos.*[0 1 numplots 1])
for ind = 1:numplots
    subplot(1,numplots,ind),plot(randi(10,10,2))
end

does show there is some width modifications to the width of each axes, especially the more you put in. However the heights are the same. You can play around with the set() command for both the figure handle and axes handles to change their positioning if this slight change from the default size is an issue.

Kamuran 2015-5-20