How to have a same size of the image with out distortion in a subplot along with the graph?

3 次查看（过去 30 天）
Vishnuvardhan Naidu Tanga
编辑： Mathieu NOE 2025-7-7
Ran in:
Hello all,
I am trying to place an image along with a plot in subplot. But when i am trying to plot the image is small compared to the size of the plot. I need both of them to be in the same size. I also used "imagesc(img);" , but the image looks distorted. Please help me with this. Thanks in advance.
My code:
set(0,'Units','pixels');
scrsz = get(0,'ScreenSize');
scr_width = scrsz(3);
scr_heigth = scrsz(4);
img = imread('Geometry.jpg');
Z = readtable('Fig1.xlsx');
alpha = 0.1;
figure('Position', round([alpha*scr_width alpha*scr_heigth (1-2*alpha)*scr_width (1-2*alpha)*scr_heigth ]));
% 1. Image subplot
subplot(1,4,1);
% imagesc(img);
imshow(img);
axis off
data = table2array(Z) ;
subplot(1,4,2)
plot(data(:,1), data(:,2), 'k','linewidth', 2);
hold off
grid on
xlabel('xxx');
ylabel('yyy');
subplot(1,4,3)
plot(data(:,3), data(:,4), 'linewidth', 2);
hold on
str = '#0072BD';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,5), data(:,6), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,7), data(:,8), 'linewidth', 2);
hold on
str = '#EDB120';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,9), data(:,10), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,11), data(:,12), 'linewidth', 2);
hold on
str = '#77AC30';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,13), data(:,14), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,15), data(:,16), 'linewidth', 2);
hold on
str = '#A2142F';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,17), data(:,18), '*', 'Color', color, 'linewidth', 2);
hold off
% legend('Wygnanski&Fiedler (1969)', 'Standard k-\in', 'RNG k-\in', 'Realizable k-\in',...
% 'SST k-\omega', 'Location', 'northeast');
grid on
xlabel('xxx');
ylabel('yyy');
subplot(1,4,4)
plot(data(:,19), data(:,20), 'linewidth', 2);
hold on
str = '#0072BD';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,21), data(:,22), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,23), data(:,24), 'linewidth', 2);
hold on
str = '#EDB120';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,25), data(:,26), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,27), data(:,28), 'linewidth', 2);
hold on
str = '#77AC30';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,29), data(:,30), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,31), data(:,32), 'linewidth', 2);
hold on
str = '#A2142F';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,33), data(:,34), '*', 'Color', color, 'linewidth', 2);
hold off
% legend('Wygnanski&Fiedler (1969)', 'Standard k-\in', 'RNG k-\in', 'Realizable k-\in',...
% 'SST k-\omega', 'Location', 'northeast');
grid on
xlabel('xxx');
ylabel('yyy');
Warning: Column headers from the file were modified to make them valid MATLAB identifiers before creating variable names for the table. The original column headers are saved in the VariableDescriptions property.
Set 'VariableNamingRule' to 'preserve' to use the original column headers as table variable names.

请先登录，再回答此问题。

采纳的回答

Mathieu NOE
Mathieu NOE 2025-7-4
hello
there is a very detailled example here how to manage subplots dimensions (if you want to master it)
How do you match the width of figures in a tiledlayout when using axis equal? - MATLAB Answers - MATLAB Central
here I offer a quick and simple solution by making the figure "wider" so that both subplots appear more alike in size
here's my result so far :
I didn't notice any difference here between imagesc and imshow
set(0,'Units','pixels');
scrsz = get(0,'ScreenSize');
scr_width = scrsz(3);
scr_heigth = scrsz(4);
img = imread('Geometry.jpg');
Z = readtable('trail.xlsx');
alpha = 0.1;
figure('Position', round([alpha*scr_width alpha*scr_heigth (1-2*alpha)*scr_width (1-2*alpha)*scr_heigth ]));
% 1. Image subplot
subplot(1,2,1);
% imagesc(img);
imshow(img);
axis off
data = table2array(Z) ;
subplot(1,2,2)
plot(data(:,1), data(:,2), 'k','linewidth', 2);
hold off
grid on
xlabel('xxx');
ylabel('yyy');
%% optionnal (try)
% pbaspect([1 1 1]) % Make the x-axis, y-axis equal lengths
% daspect([1 1 1]); % equal lengths in all directions
  5 个评论
显示 3更早的评论
Vishnuvardhan Naidu Tanga
Vishnuvardhan Naidu Tanga 2025-7-4
Hello @Mathieu NOE,
Thank you for the response. As you can see the size of the image and the plots are not same. How can I have both width and height of all the plots and image same?
Mathieu NOE
Mathieu NOE 2025-7-6
编辑：Mathieu NOE 2025-7-7
hello again
tried to find a good balance ... you can opt for the automatic tuning or the manual settings (factor "a" that allows a different width to the image plot axis) - see what works for you
I believe with a = 1.5 I have the best rendering :
img = imread('Geometry.jpg');
[m,n] = size(img);
h2w_ratio = n/m;
Z = readtable('Fig1.xlsx');
data = table2array(Z) ;
%%
f = figure('Units','normalized','Position', [0.1 0.1 0.8 0.8]);
height = 0.6;
hs = 0.05; % horizontal separation
left = hs;
width = 1-2*left;
bottom = 0.5 - height/2;
N = 4; % nb of subplots = axes
%% increase width of first axe by factor a
% if we want to equal height to width ratios between image and plot axes , this
% means for the 1st axe : height/(a*w) = h2w_ratio
% combined with : w = (width - (N-1)*hs)/(a + (N-1));
% we obtain the optimal a value as :
a = height/h2w_ratio*(N-1)/(width - (N-1)*hs - height/h2w_ratio); % automatic tuning
a = 1.5; % manual tuning
w = (width - (N-1)*hs)/(a + (N-1));
% create first axe with specific dimensions
ax(1) = axes(f,'Position',[left bottom a*w height]);
left = left + a*w + hs;
% then the rest with same dims
for k = 2:N
ax(k) = axes(f,'Position',[left bottom w height]);
left = left + w + hs;
end
% 1. Image subplot
% subplot(1,4,1);
imshow(img, 'Parent', ax(1));
axis off
% subplot(1,4,2)
axes(ax(2)); % Activate the 2nd axes
plot(data(:,1), data(:,2), 'k','linewidth', 2);
hold off
grid on
xlabel('xxx');
ylabel('yyy');
% subplot(1,4,3)
axes(ax(3)); % Activate the 3rd axes
plot(data(:,3), data(:,4), 'linewidth', 2);
hold on
str = '#0072BD';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,5), data(:,6), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,7), data(:,8), 'linewidth', 2);
hold on
str = '#EDB120';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,9), data(:,10), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,11), data(:,12), 'linewidth', 2);
hold on
str = '#77AC30';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,13), data(:,14), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,15), data(:,16), 'linewidth', 2);
hold on
str = '#A2142F';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,17), data(:,18), '*', 'Color', color, 'linewidth', 2);
hold off
% legend('Wygnanski&Fiedler (1969)', 'Standard k-\in', 'RNG k-\in', 'Realizable k-\in',...
% 'SST k-\omega', 'Location', 'northeast');
grid on
xlabel('xxx');
ylabel('yyy');
% subplot(1,4,4)
axes(ax(4)); % Activate the 4th axes
plot(data(:,19), data(:,20), 'linewidth', 2);
hold on
str = '#0072BD';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,21), data(:,22), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,23), data(:,24), 'linewidth', 2);
hold on
str = '#EDB120';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,25), data(:,26), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,27), data(:,28), 'linewidth', 2);
hold on
str = '#77AC30';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,29), data(:,30), '*', 'Color', color, 'linewidth', 2);
hold on
plot(data(:,31), data(:,32), 'linewidth', 2);
hold on
str = '#A2142F';
color = sscanf(str(2:end),'%2x%2x%2x',[1 3])/255;
plot(data(:,33), data(:,34), '*', 'Color', color, 'linewidth', 2);
hold off
% legend('Wygnanski&Fiedler (1969)', 'Standard k-\in', 'RNG k-\in', 'Realizable k-\in',...
% 'SST k-\omega', 'Location', 'northeast');
grid on
xlabel('xxx');
ylabel('yyy');

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Graphics Performance 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by