how to validate identification of a MIMO system with PRBS signal?

Question

Sahar Rajaei 2015-6-5

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/222622-how-to-validate-identification-of-a-mimo-system-with-prbs-signal

评论： Sahar 2015-6-9

Hi I have a MIMO system with 4 inputs, and 4outputs, which I have used a PRBS signal for identification. Now I want to validate my estimated system by comparing the simulation of the system, with the same signal, as used for identification. but I dont know how to apply an array of 4 to my MIMO system, for simulation in simulink. By the way, I am not using the PRBS generator box for the signal, I use the code : u = idinput([2^10 4],'prbs',[0 1/1000],[0 40]);

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Drew Davis 2015-6-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/222622-how-to-validate-identification-of-a-mimo-system-with-prbs-signal#answer_181990

Use the 'lsim' command to simulate the output of a system given a set of input signals and a corresponding time vector

http://www.mathworks.com/help/control/ref/lsim.html

In Simulink, assuming you are using the 'LTI block' to wrap around your MIMO system, simply send a four element vector to the input of the block. You may import your workspace data into Simulink by using a 'From Workspace' block.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Sahar 2015-6-9

Great Drew Davis! I could not use from workspace, since the variable must be monotonically increasing, and in my case, it is not increasing. But lsim worked for me,Thanks!

请先登录，再进行评论。