Error using + Complex integer arithmetic is not supported.

32 次查看（过去 30 天）
imarquez
imarquez 2015-8-11
评论： Walter Roberson 2015-8-11
Why can I get a result when I dont put int64() in front of Ff and put it in front of Zf, but not whe I put it in front of both?
if true
format long
a = 1
b = 3E-7
c = 5E-8
f0 = 4E9
sigma = 0.2
t0 = 0
tmax = 2.*b
f = linspace(1E6,1E10,1000)
t = linspace(t0, tmax,1000)
omega = 2.*pi.*f
omega0 = 2.*pi.*f0
G = -2.*pi.*f.*(pi.*c.^2.*f + sqrt(-1).*b)
D = (((b-(sqrt(-1)).*2.*pi.*c.^2.*f-t0)/(sqrt(2).*c)))
E = (((b-(sqrt(-1)).*2.*pi.*c.^2.*f-tmax)/(sqrt(2).*c)))
Ff = uint64(abs(sqrt(pi/2).*a.*c.*exp(G).*((-sqrt(-1).*(erfi(-sqrt(-1).*D)))-((-sqrt(-1).*(erfi(-sqrt(-1).*E))))))) % equation (3)
Zf = uint64(((1-(sigma/2)).*Ff) + (sqrt(-1).*sqrt(pi/2).*((a.*c.*sigma)/4).*exp(-((2.*pi.*f+omega0).*(c.^2.*(2.*pi.*f+omega0)+2.*sqrt(-1).*b)))).*(-exp(4.*pi.*c.^2.*f.*omega0+2.*sqrt(-1).*b.*omega0).*((-sqrt(-1).*erfi(((tmax-b+sqrt(-1).*c.^2).*(2.*pi.*f-omega0))/(sqrt(2).*c)))-(-sqrt(-1).*erfi(((t0-b+sqrt(-1).*c.^2).*(2.*pi.*f-omega0))/(sqrt(2).*c))))+(-sqrt(-1).*(erfi(((tmax-b+sqrt(-1)*c.^2).*(2.*pi.*f+omega0))/(sqrt(-1).*c))))-(-sqrt(-1).*erfi(((t0-b+sqrt(-1).*c.^2).*(2.*pi.*f+omega0))/(sqrt(-1).*c))))) % equation (5)
figure(6)
plot(f,Zf) % plot of Magnitude of G (eq 5) vs frequency for f:(10^6 to 10^10)
% code
end

请先登录，再回答此问题。

回答（1 个）

Walter Roberson
Walter Roberson 2015-8-11
编辑：Walter Roberson 2015-8-11
>> uint64(1) + (-1+1i)
Error using +
Complex integer arithmetic is not supported.
>> uint64(1) + uint8(1)
Error using +
Integers can only be combined with integers of the same class, or scalar doubles.
When you do an arithmetic operation on a uint64() the other operand must be a non-complex uint64() or must be a scalar non-complex double.
Complex uint64 are allowed: you just cannot do any arithmetic on them.
>> uint64(-1+1i)
ans =
0 + 1i
>> uint64(-1+1i) + 0
Error using +
Complex integer arithmetic is not supported.
>> uint64(-1+1i) + uint64(0)
Error using +
Complex integer arithmetic is not supported.
Work around: use real() and imag() to split the values, do the arithmetic on the parts separately, and complex() them back together.
But the real fix is to not use uint64 without good purpose.
  2 个评论
imarquez
imarquez 2015-8-11
I need to use uint64() in order to get values out of the equations. Otherwise matlab returns NaN and 0 when they are actually just really small numbers.
Walter Roberson
Walter Roberson 2015-8-11
If you insist on using uint64 then use the work-around I indicated. You could even make an anonymous function out of it:
pluscomplex_uint64 = @(A,B) complex(real(A)+real(B),imag(A)+imag(B))
then replace the problem sums with calls to pluscomplex_uint64 and that will get you through. Until, of course, the place you try to multiply or divide or subtract the uint64 numbers...
But you should not be using uint64 for this purpose at all: just use isnan() to find out where the NaN's are and replace them.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Programming 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by