how to set preference to arduino ide, what file exactly is it?

3 次查看（过去 30 天）
Dan Sergison
Dan Sergison 2011-12-15
trouble folowing these instruction,.
what file is the actual IDE? arduino-0022 does not exist. arduino.exe does not work.
(example from instalation instruction copied below)
a) Specify location of the Arduino IDE
>> arduino.Prefs.setArduinoPath('c:\Program Files\arduino\arduino-0022')
b) Specify Arduino board (Duemilanove, Uno, Mega, etc.)
>> arduino.Prefs.setBoard % see list of board options
>> arduino.Prefs.setBoard('uno') % choose a specific board
my arduino installation directory is: c:\arduino-1.0
target dir is c:\arduinotarget
my matlab comand errors:
>> arduino.Prefs.setArduinoPath('c:\arduino-1.0\arduino-0022') ??? Error using ==> Prefs>Prefs.setArduinoPath at 21 The specified folder (c:\arduino-1.0\arduino-0022) does not exist
  2 个评论
Kaustubha Govind
Kaustubha Govind 2011-12-15
It looks that error is thrown if "exist('c:\arduino-1.0\arduino-0022','dir')" returns false. Are you sure that there is a folder called 'arduino-0022' under c:\arduino-1.0?
Dan Sergison
Dan Sergison 2011-12-15
there is not. i had just copied the instructions. I now have it set to just c:arduino-1.0 which contains arduino.exe

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Chirag Gupta
Chirag Gupta 2011-12-15
Dan, I would suggest using arduino-023 or arduino-022. Arduino-1.0 has significant changes as compared to the previous versions including reorganizing of some files (structure of the package, the header files etc! boards.txt is used to figure out the board settings and the placement of this file has changed with arduino 1.0)
(For example, Wprogram.h has been renamed to Arduino.h)
http://arduino.cc/en/Main/ReleaseNotes
  3 个评论
显示 1更早的评论
Dan Sergison
Dan Sergison 2011-12-15
thank you. it works now with 22 installed.
had trouble with building and example, problem with with a simulink arduino_make_rtw_hook, . will open an appropriate thread.
thanks again ALL of you for helping!

请先登录，再进行评论。

更多回答（1 个）

Chirag Gupta
Chirag Gupta 2011-12-15
The release before arduino-1.0 was arduino-023 (and before that was arduino-022)
Just set the arduino root folder (under which arduino.exe is present)
  2 个评论
Dan Sergison
Dan Sergison 2011-12-15
I did that, but then I cant figure out ow to set the board preferences. I figured it must be because I had specified the wrong path. I did not know that arduino.exe was the "IDE file" it was looking for, thank you. still, I can't proceede.
my path is set to the directory with arduino.exe
>> arduino.Prefs.setArduinoPath('c:\arduino-1.0')
per instruction part b I tried to list the available boards:
>> arduino.Prefs.setBoard
??? Reference to non-existent element of a cell array.
Error in ==> Prefs>Prefs.parseBoardsFile at 227
lhs = parsedLines{i}{1}{1}; % can be of the form xx.yy.zz
Error in ==> Prefs>Prefs.setBoard at 66
boards = arduino.Prefs.parseBoardsFile(boardsFile);
and tried to set to UNO
>> arduino.Prefs.setBoard('uno')
??? Reference to non-existent element of a cell array.
Error in ==> Prefs>Prefs.parseBoardsFile at 227
lhs = parsedLines{i}{1}{1}; % can be of the form xx.yy.zz
Error in ==> Prefs>Prefs.setBoard at 66
boards = arduino.Prefs.parseBoardsFile(boardsFile);

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Setup and Configuration 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by