Read Data from MATLAB Serial Port one by one byte and then process it ?

Question

Arun Sharma 2015-12-1

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/258431-read-data-from-matlab-serial-port-one-by-one-byte-and-then-process-it

评论： Walter Roberson 2015-12-1

Hello!! All

I have to develop a MATLAB GUI application, which will regularly communicate with my Hardware and share data from hardware and MATLAB. The communication interface is Serial Interface.

The problem is that, i can't add any terminator in my packet, i just have a Start of Packet and at last the byte of packet is check-sum of whole packet, so what i decided is to write a callback function, which is called whenever data is received on serial port.

% Create Serial Object at 9600 BaudRate
handles.serial = serial('COM1','BaudRate', 9600);
handles.serial.BytesAvailableFcnCount = 1;
handles.serial.BytesAvailableFcnMode = 'byte';
handles.serial.BytesAvailableFcn = @Serial_Receive;

And the callback function is as follow:

function Serial_Receive(sObject, eventdata)
global TransRxBuffer;
global TRANS_STATE_IDLE;
global TRANS_STATE_DEST;
global TRANS_STATE_SRC;
global TRANS_STATE_LEN;
global TRANS_STATE_DATA;
global TRANS_STATE_CS;
global trans_state;
global TRANS_HEADER;
global MY_ADDRESS;
global DEST_ADDRESS;
global true false;
true = 1;
false = 0;
ByteAvailable = sObject.BytesAvailable;
tmp_c = fread(sObject,1,'uint8'); % Reading only 1 byte
switch(trans_state)
    case TRANS_STATE_IDLE
        if tmp_c == TRANS_HEADER        
        trans_state = TRANS_STATE_DEST;
        TransRxBufferCount = 0;
        trans_length = 0;
        data_ready = false;
        TransRxBuffer(TransRxBufferCount) = tmp_c;
        TransRxBufferCount = TransRxBufferCount + 1;
        TransChecksum = 0;
        TransChecksum = bitxor(TransChecksum,tmp_c);
        end
    case TRANS_STATE_DEST
AND SO ON....