Using a Smart Motor with Matlab

3 次查看（过去 30 天）
Ryan
Ryan 2012-1-18
编辑： Daniel 2014-4-10
I have a Smart Motor made my Animatics (www.animatics.com). They have examples of how to control it using a COM object in C++ and Visual Basic. I have tried using the actxserver function but to no avail.
The VB sample is as follows:
Sub EngineUserSub()
On Error GoTo ErrorHandler:
' Create an instance of SMIHost object
Dim CommInterface As SMIHost
Set CommInterface = New SMIHost
CommInterface.OpenPort(“COM1”)
n = CommInterface.AddressMotorChain
‘ Send a command and get response
CommInterface.DefaultMotor = 1
CommInterface.WriteCommand(“RSP”)
Dim Response As String
Response = CommInterface.ReadResponse
MsgBox(Response)
If anyone has accomplished this or has any insight, it would be greatly appreciated.
Thank you, Ryan

请先登录，再回答此问题。

回答（1 个）

Daniel
Daniel 2014-4-10
编辑：Daniel 2014-4-10
The following may be helpful:
Note: a space acts as a delimiter for commands sent to the motor
function openmoveclose(x)
%open the serial port COM1
%apply the displacement x (in steps)
%close the port
% choose the serial port COM1
s = serial('COM1');
% set all the properties of the port
s.BaudRate = 9600;
s.DataBits = 8;
s.Terminator = 'LF/CR';
s.RequestToSend = 'off';
s.FlowControl = 'software';
s.DataTerminalReady = 'off';
s.parity = 'none';
%open the port
fopen(s);
%apply displacement
%allow 5ms second for initialization => prevent 'fuzzy' dismissal of the command
%clear the board memory
%remove hardware limits, set velocity and acceleration
preamble = ['EIGN(2) EIGN(3) ZS a=0 AT=9000 VT=283032 END'];
command = ['WAIT=5' ' ' 'PT=' int2str(sign(x)*round(abs(x))) ' ' 'G'];
fprintf(s,preamble);
fprintf(s,command);
%close the port
fclose(s);
delete(s)
clear s;
end

社区

更多回答在  Power Electronics Control

类别

在 Help Center 和 File Exchange 中查找有关 Use COM Objects in MATLAB 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by