Output data to new text file for every time step

Question

Krish Desai 2016-3-25

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/275349-output-data-to-new-text-file-for-every-time-step

回答： Vidya Viswanathan 2016-3-29

where should I put my printf's that for the current time steps that I have, I get 5 new files for each step with the x,y,z positions contained in them?

 dt=5*10e-5;
  for t=0:dt:4*dt %99 for 100 graphs
      figure;
      for ind=1:1920
      U=(3*ind+linspace(1,3,3)-3);
      Phi= PHI_disp_RBME_ModePlot_N(U);
      r=xlocs_full(ind);
      omega=(f_disp_RBME(iMode,kPtMode)*2*pi);
      k=kappa_space(kPtMode);
      spatialphase=k*r;
      timephase=omega*t;
      displ=Phi*exp(i*((spatialphase)-(timephase)));
      xOvito(ind)=xOvito(ind)+magFact*displ(1);
      yOvito(ind)=yOvito(ind)+magFact*displ(2);
      zOvito(ind)=zOvito(ind)+magFact*displ(3);
      end
      header1= 'id';
      header2= 'type';
      header3='x';
      header4='y';
      header5='z';
      fid=fopen('Dumped.txt','w');
      %fprintf(fid, [header 1 ' ' header 2 ' ' header 3 ' ' header 4 ' ' header 5 ' '\n']);
      fprintf(fid, [ header1 ' ' header2 ' ' header3 ' ' header4 ' ' header5 '\n']);
      fprintf(fid, '%f %f %f \n', [xOvito yOvito zOvito]');
      fclose(fid);
      plot3(xOvito,yOvito,zOvito,'ko','markerfacecolor','r', 'markersize', 7);
      xrotation = 0;
      yrotation = 0;
      view(xrotation, yrotation);
      xlabel('x')
      ylabel('y')
      zlabel('z')
      axis equal
      xview=0;
      yview=0;
      view(xview,yview);
  end

After looking at my code, I see that each time I rewrite the text file, so I only have the last time step's data. How do I change this?

3 个评论
显示 1更早的评论隐藏 1更早的评论

Krish Desai 2016-3-25

编辑：Krish Desai 2016-3-25

在 MATLAB Online 中打开

Tried to use sprintf, only created one file....

%TimeStep
%kPtMode=3;
%iMode=6;
dt=5*10e-5;
steps=4;
for t=0:dt:steps*dt %99 for 100 graphs
    figure;
    for ind=1:1920
    U=(3*ind+linspace(1,3,3)-3);
    Phi= PHI_disp_RBME_ModePlot_N(U);
    r=xlocs_full(ind);
    omega=(f_disp_RBME(iMode,kPtMode)*2*pi);
    k=kappa_space(kPtMode);
    spatialphase=k*r;
    timephase=omega*t;
    displ=Phi*exp(i*((spatialphase)-(timephase)));
    xOvito(ind)=xOvito(ind)+magFact*displ(1);
    yOvito(ind)=yOvito(ind)+magFact*displ(2);
    zOvito(ind)=zOvito(ind)+magFact*displ(3);
    end
    plot3(xOvito,yOvito,zOvito,'ko','markerfacecolor','r', 'markersize', 7);
    xrotation = 0;
    yrotation = 0;
    view(xrotation, yrotation);
    xlabel('x')
    ylabel('y')
    zlabel('z')
    axis equal
    xview=0;
    yview=0;
    view(xview,yview);
    header1= 'id';
    header2= 'type';
    header3='x';
    header4='y';
    header5='z';
    filename=sprintf('%s_%d','filename',i);
    fid=fopen(filename,'w');
    %fprintf(fid, [header 1 ' ' header 2 ' ' header 3 ' ' header 4 ' ' header 5 ' '\n']);
    fprintf(fid, [ header1 ' ' header2 ' ' header3 ' ' header4 ' ' header5 '\n']);
    fprintf(fid, '%f %f %f \n', [xOvito yOvito zOvito]');
    fclose(fid);
end
end

Walter Roberson 2016-3-25

You do not initialize or change i, so it is going to have its default value as sqrt(-1)

Krish Desai 2016-3-25

What should I change i to? What is supposed to be there?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Vidya Viswanathan 2016-3-29

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/275349-output-data-to-new-text-file-for-every-time-step#answer_215455

在 MATLAB Online 中打开

Hi Krish,

I believe you are looking for a method to append the data from the next time stamp to the file rather than rewriting it. The function "fopen" provides you with an option to open the file with the appropriate access. To append to the existing file, you would have to open it as follows:

>> fid=fopen(filename,'a');

You could refer to the following documentation page for the same information:

http://www.mathworks.com/help/matlab/ref/fopen.html?searchHighlight=fopen#inputarg_permission

I hope this answers your question.

Regards,

Vidya

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Output data to new text file for every time step

3 个评论
显示 1更早的评论隐藏 1更早的评论

回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

Output data to new text file for every time step

3 个评论 显示 1更早的评论隐藏 1更早的评论

回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

3 个评论
显示 1更早的评论隐藏 1更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论