Plotting points simultaneously with input from figure using ginput

2016 7 23
1 个回答
更新时间：2016 7 24
4 次查看（30 天）

0 个投票

I have six figures on which I need to plot points on the curve. I don't know how many points I need on each figure. This is my code to get all points:
for i = 1:6
figure(i)
plot(SLOPE{i, 1});
set(figure(i), 'units', 'normalized', 'outerposition', [0 0 1 1])
xlabel('Counts', 'FontSize', 12, 'FontWeight', 'bold')
ylabel(strcat('Slope\_', num2str(i)), 'FontSize', 12, 'FontWeight', 'bold')
title(strcat('SLOPE \_', num2str(i)))
hold on
[P1, P2] = ginput(10);
P1 = floor(P1);
SLOPE{i, 2} = [P1, P2];
if ~isempty(P1)
plot(P1, SLOPE{i}(P1), 'pentagram', 'Color', 'red', 'MarkerSize', 10,...
'LineWidth', 2, 'MarkerFaceColor', 'black');
end
end
I don't need more than 10 points in each figure, for some figures, I don't need any points. My problem is that I want each point to be plotted after I select it. With the above code, I can see all points plotted in a figure on hitting enter after I select all points. I have tried using 'waitforbuttonpress' along with a while loop, but a click is also considered a button press. Any help would be greatly appreciated.
Thanks,
Koustubh

请先登录，再回答此问题。

回答（1 个）

Image Analyst
Image Analyst 2016-7-23

0 个投票

You need to have an inner loop over the number of points
for i = 1:6
for n = 1 : 10
[x,y] = ginput(1); % Get one point at a time.
plot(..........
end
end

4 个评论
显示 2更早的评论 隐藏 2更早的评论

Koustubh Gohad
Koustubh Gohad 2016-7-24
If I make an inner loop like this:
for i = 1:6
for n = 1:10
figure(i)
plot(SLOPE{i, 1});
set(figure(i), 'units', 'normalized', 'outerposition', [0 0 1 1])
xlabel('Counts', 'FontSize', 12, 'FontWeight', 'bold')
ylabel(strcat('Slope\_', num2str(i)), 'FontSize', 12, 'FontWeight', 'bold')
title(strcat('SLOPE \_', num2str(i)))
hold on
[P1, P2] = ginput(1);
P1 = floor(P1);
SLOPE{i, 2} = [P1, P2];
if ~isempty(P1)
plot(P1, SLOPE{i}(P1), 'pentagram', 'Color', 'red', 'MarkerSize', 10,...
'LineWidth', 2, 'MarkerFaceColor', 'black');
end
end
end
I have to select 10 points before I can go on to the next figure. I don't know the number of points I need in a figure. I tried using a while loop before with 'waitforbuttonpress', but, it doesn't work because a mouse click and hitting enter are both considered button presses.
Image Analyst
Image Analyst 2016-7-24
No. The figure() and some other lines should not be inside the inner loop of course. Try again.
Image Analyst
Image Analyst 2016-7-24
Do you want all 10 graphs up before any clicking starts? And the user can go into any one of the 10 plots that they want and click there? If so, that's entirely different and more complicated code.
Koustubh Gohad
Koustubh Gohad 2016-7-24
I figured it out. I needed to save those points too. For each figure, points are stored in the second column of 'SLOPE'. First column has plotting data for each figure. Much more looping needed than I anticipated.
SLOPE = cell(6, 2);
for i = 1:6
figure(i)
plot(SLOPE{i, 1});
set(figure(i), 'units', 'normalized', 'outerposition', [0 0 1 1])
xlabel('Counts', 'FontSize', 12, 'FontWeight', 'bold')
ylabel(strcat('Slope\_', num2str(i)), 'FontSize', 12, 'FontWeight', 'bold')
title(strcat('SLOPE INJ\_', num2str(i)))
hold on
TEMP = zeros(100, 1);
for N = 1:100
[P1, ~] = ginput(1);
if ~isempty(P1)
P1 = floor(P1);
else
P1 = 0;
end
TEMP(N) = P1;
Key = get(figure(i), 'CurrentCharacter');
if ~isempty(Key)
break
end
if ~isempty(P1)
plot(P1, SLOPE{i}(P1), 'pentagram', 'Color', 'red', 'MarkerSize', 10,...
'LineWidth', 2, 'MarkerFaceColor', 'black');
end
end
if length(TEMP) == 1
SLOPE{i, 2} = [];
else
TEMP = sort(TEMP(1:N - 1), 'ascend');
SLOPE{i, 2} = [TEMP, SLOPE{i, 1}(TEMP)];
end
end
Thank you for your help!

请先登录，再进行评论。

类别

在 帮助中心 和 File Exchange 中查找有关 Data Exploration 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by